Hybrid material based on sulfonated polystyrene and graphene
Analyzer at room temperature. From the measurements were obtained conductivity (σ) and capacitance (ε) maximum 13.94 mS/m and 188.32 nF/m respectively
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
Analyzer at room temperature. From the measurements were obtained conductivity (σ) and capacitance (ε) maximum 13.94 mS/m and 188.32 nF/m respectively
that of 2014 respectively. Cadmium concentrations obtained in this study was higher than Maximum Contaminant Levels set by Standard Organizations such as W.H.O. and F.A.O
membrane. Pure water flux of the CaCl2 composite membranes was improved to a maximum of four times as compared with pure PES membrane. Dye rejection studies revealed that the blend
compared with international standards, some of the elements are in high concentration, more than maximum permitted allowed in both seasons, in almost every sampling point. While, metals
ions. Metal ion concentrations were measured by using Atomic Absorption Spectroscopy (AAS). Maximum adsorption capacity of Zn(II) by using Andrographis paniculata and Muntingia calabura Lleaves were
estimation of Dapagliflozin in Bulk and its pharmaceutical dosage forms. An absorption maximum was found to be at 233.65 nm. Dapagliflozin obeyed Beer’s law in the concentration range from
complete degradation has been achieved in a somewhat short period alternatively 60 min. The maximum removal of color was found at higher temperature(318 K) . The results showed that
Signal response of targeted analytes, which accounts as sum of peak areas has shown maximum response (y = 276920, in-matrix derivatization) slightly higher compared to on-fiber derivatization
colored complexes 1:1 stoichiometry of Pd(II) and Ag(I), which show a maximum absorbance of 518 and 492 nm of molar ratio absorbitivity
concentrations and temperatures. Adsorption of extract at mild steel surface follows Langmuir adsorption isotherm. Maximum inhibition efficiency of 90% was observed with 6% (v/v) concentration of inhibitor at 30oC
aqueous phase were effectively removed. The analysis of the treated water showed that the maximum COD, BOD and SS removal efficiencies were 92.71%, 88.76% and 93.1%, respectively at optimum conditions
current density, electrolyte concentration, reaction temperature, etc. were calculated and presented. Electrochemical oxidation process maximum COD removal of about 89.01% was achieved at an optimum current density of…
acid with different counter cation showed the variation in pH. The ulcer healing was maximum in case of glycyrrhetinic acid ammonium and minimum in case of glycyrrhetinic acid calcium, which
seeds scarifies by GA3 treatment method was recorded to be the best treatment with maximum germination of 17.6 ± 1.2 seeds within a minimum time interval. Treatments of GA3 not only
positive response to AM fungal inoculation. The per cent AM fungal root colonization was maximum (48.6%) in Ankur variety. While, Jyothi and Manjirigutta showed 40.15 and 40.0% respectively. Plants inoculated…
split plot design with three replications in the 2007 - 2008. Results indicated that Maximum (374.67 gm -2 ) and minimum (198.5 gm-2 ) grain yield was obtained from
draba extracts against bacterial strains ranged from 3 to 134 μg/mL. The maximum and minimum MIC values for S. aureus were 3 μg/mL for the ethanolic leaf extract ... inhibition of protein denaturation. ELE (500 μg/mL)…
this improvement was maintained across all groups at week 52 with group 2 showing maximum improvement (10.2% at week 28 reported âÂ?Â?no impact of diseaseâÂ? on QoL compared
activity (% lysis) was calculated using the formula (Test cell mix-Effector control-spontaneous release)/(maximum release-spontaneous release). The data shows that when the effector cells were stimulated
chewing. Using peNDF>1.18 intake and fragile DM in a linear model explained maximum (95.41%) of variation in chewing activity. Therefore, combination of particle size and fragility in rations
respectively. On the other hand, the maximum obtained specific capacitance is 478 F g-1 at a scan rate of 5 mV s-1. In addition, we prepared a novel
harvested cells. Ideally, the cells should be harvested at the point of maximum function. However, the activities of most, if not all, immunocytes decline when the cells are cultured
Cyclosporine A is administered in three groups of indications: Group I – dermatoses treated with maximum efficacy drugs, where CyA represents an extraordinarily effective first choice drug. Group II - dermatoses with
cells. Peptide-2 showed a dose dependent inhibition on the TNF-α activity, with maximum effect at 200 μM of the peptide concentration (p < 0.05). No significant cytotoxicity was observed
analysis of the full-length viral consensus sequences performed using the neighbour joining and maximum likelihood method. Trees were constructed from alignment of complete genome sequences by using best
For authors and organisers
Find the right journal for your paper and submit your manuscript.