pore size distribution), phase composition, microstructure and mechanical properties of MBSC ceramics prepared by both the methods were investigated. Porosity varied in a range ... pore size from 6-8 μm and 5-11…
glass from 106 microns and minus 75 microns soda lime silica glass powder were prepared. Water, sodium silicate and bentonite were added as the binders and three sets of compacts ... third set containing bentonite and…
CZFMO-PZT) trilayer composite samples. Samples were prepared using co-sintering method with different thickness values (0.6 mm, 1.2 mm, 1.8 mm) of CZFMO and constant thickness value
therefore to decrease the methanol permeability, partially sulfonated poly (arylene ether sulfone) copolymers were prepared via the solution condensation polymerization of 4-fluoro phenyl sulfone, hydroquinone…
reactants. It is also simpler and more versatile than the ubiquitous solvent-based methods currently favored. The feasibility of using PICVD for the functionalization of surfaces has been investigated using ... PICVD…
aluminum-hematite composite. The Al-Mg-Si -hematite composite is prepared using liquid metallurgy route by the vortex method. Cast composites were subjected to standard heat treatment used
controlled by tailoring the degree of polymer under-cooling during the composite solution preparation and the flow parameters of spinning. The resultant fibers demonstrate superior tensile strength, modulus, and…
this research, zirconium nano particle are prepared using combustion synthesis process. Zirconium nitrate and sugar crystals are taken in the ratio of 1:1.5 stirred with distilled water ... volume nano particles of Zro…
nanocomposites were prepared by the incorporation of EG in various proportions (1, 2, 3 and 4%) into PMMA-co-PAN through in situ emulsifier-free emulsion polymerization method. The conductivity
conductive glass by electrochemical deposition while CeO 2 quantum dots (QDs) were prepared by a solvothermal method. Subsequently, the as-prepared CeO 2 QDs were embedded into ZnO NRs array
approach to assemble organic molecules and organic-inorganic hybrid into nanostructures. The nanoassemblies prepared by this method could be made in large quantities at a low cost ... facile method, which makes them…
transmittance, particle size etc. Formulations, differing in fatty acid (palmitic acid) composition were prepared by dilution method. Dendrimer containing compositions tend to form nanoparticles upon dilution. The core…
development of their blend, co-polymer and composites. Herein, we report in situ preparation of polycarbazole (PCz)/titanium dioxide (TiO 2 ) nanocomposites (PCz/TiO 2 ) by using ... nanocomposite. The conductivity of…
film rehydration techniques, electro formation, and standard swelling procedure using block copolymers prepared through living anionic polymerization and thermally controlled/living radical polymerization. The…
present study was to prepare activated carbon from diss and esparto grass fibres or Alfa under vacuum condition with chemical activation method using zinc chloride (ZnCl 2 ) as activating agent ... variety of dyes. We…
combine this particular SWNT structure with polymers to form BP-based polymer composites. Different methods have been used and can be divided into two categories: (i) infiltration of polymers into ... work, a new route…
showed promising thermoelectric properties. The combinatorial film technique is a high throughput method to study phases and phase relationships in a binary or multicomponent system. This technique has an advantage…
composed of 85% SiO 2 , 10% CaO, and 5% P 2 O 5 was prepared with the goal to obtain mesoporous biomaterial for use in bone surgery. Different surfactants were ... permit the vectorization of the therapeutic molecules…
approaches for the preparation and high-content screening of polymer microarray platform and their application in a number of cell based screens. Fabrication methods, including direct inkjet based polymer synthesis
attractive properties that the single component couldn?t achieve may be obtained by complex method. Therefore, we propose and verify that the resistivity and B value can be adjusted ... spinel-structured NiMn 2 O 4 and…
prepared from high strength low alloy steels by intermediate heat treatment. These steel so prepared have a combination of remarkable mechanical properties such as high tensile strength, good ductility ... Salt spray…
metals such as Si and Zn were synthesized through sol-gel method. The characterization results confirm that the prepared biomaterials are in nano- sized with high mechanical and high surface
spin coating method without a catalyst are prepared. CdS nanostructures have been characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) to research the topography and morphology
microparticles is prepared by Oil/Water (O/W) emulsion solvent evaporation method. In situ chitosan thermogelling system is prepared by mixing 1.6% chitosan solution with 60% ammonium hydrogen phosphate ... followed by…
films. Graphene was synthesized by modified Hummer?s method and subsequently reduced before using for film fabrication. Titania sol was prepared which was mixed with varying amount of reduced graphene
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.