cubes of 100mm dimension for 7, 14, 21 and 28 days and the compressive strength and density determined. The percentage replacement of Ordinary Portland Cement (OPC) varies to the control ... replacement) about 40%. The…
days of curing were tested for density, water absorption, compressive strength, tensile strength and erosion resistance. It was found that the pozzolana content slightly improved the blocks’ density. There ... over the…
step. For this study M25 grade of concrete are used. The experimental study of compressive strength of fly ash concrete cubes at age of 7, 14 and 28 days ... quarry dust concrete. Finally, this study shows the…
This paper reports the results from laboratory studies on the compressive strength of mortar for Ferro cement that contains ternary blends of Portland cement, silica fume and super plasticizer ... Totally 586 mortar…
proportion methods. The experiment are conducted in two phases to observe the properties i.e. compressive strength and water absorption of fly ash cement brick. In both phase the cement ... concrete research laboratory…
sodium hydroxide/sodium silicate solution, Metalkaolin, sand and water. Test results indicate that the compressive strength is directly affected the fly ash and Metakaolin content and significantly affected the curing…
paper presents results of an experimental program on the mechanical properties such as density, compressive strength, split tensile strength and flexural strength of geopolymer concrete using fly ash collected from…
Standard Cubes cylinder and beam were testedon 7, 28,52 and 90 days for compressive strength , split tensile strength and flexural strength was estimation respectively
mechanical tests conducted on the sample were the Brazilian test and the uniaxial compressive test. Microscopic analyses from thin section were done to better understand the reasons for the mechanical ... from the…
results of the Strength properties of Polypropylene fiber reinforced concrete have been presented. The compressive strength, splitting tensile strength of concrete samples made with different fibers amounts varies from
strength indication, while the other specimens were tested at 28 days to obtain compressive strength. The mortar and concrete compressive strength results obtained at 7 days moist curing time represent ... differences…
some engineering properties of normal strength concrete such as workability and compressive strength and hopefully select a better alternative for the concrete mix utilising such wastes. Thus, this will lead
properties for fresh concrete are tested like slump cone test and for hardened concrete compressive strength at the age of 7,28,56 and 90 days. The test result indicate
water absorption of ceramic waste aggregate on strength properties of ceramic aggregate concrete. Compressive strength and split tensile strength of concrete made with ceramic waste aggregate is studied with replacement
concrete properties studied were setting time and workability and the Engineering properties studied are compressive strength was measured in 1,7,28 days, split tensile strength was measured ... sodium carbonate was the…
glass fibers has been used to learn (the result resting on compressive, flextural and split tensile strength lying on) Mix proportions 20 (1:1.5:3) (grade of concrete through ... glass fiber. Which coarse aggregate…
with micro silica, super plasticizer and VMA is evaluated. It was found that te compressive strength of cubes at 5% replacement is 28% higher than that of 10% replacement
nanoparticles in the Al matrix. Mechanical characterization results revealed that hardness, elastic modulus, compression and tensile strengths increased whereas ductility decreased with an increase in B4C content…
which the bagasse ash is partially replaced with cement showed higher values of compressive strength and tensile strength when compared to that of conventional concrete and the durability
fiber) on the compression and flexural performance of ultra-high performance concrete (UHPC).The compressive strength of UHPC with water-cementitious ratio of 0.23 exceeded 150 MPa after oven curing ... provides a…
admixtures in the concrete not only enhances its strength properties but also durability. The compressive strength are investigating finding the optimum use of mineral admixture( Silica fume of levels
enhance not only both tensile and flexural strengths of concrete, but also reduce its compressive strength, workability and air content of concrete, as well as maintain the unit weight
Alginate: 2% w/t; 4% w/t and 6% w/t to improve the compressive strength knowing that coral based hydroxylapatite is highly porous and brittle. Autograph was used ... test out the compressive strength of the samples…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.