construction of the retaining wall. This study investigates, how varying the penetration depth affects; deformations, anchored forces and wall moments for static and dynamic case. A series of numerical modeling…
most widely used to measure the strength, deformation and dynamic characteristics of soils. Such experiments can also help to simulate and comprehend the liquefaction characteristics and evaluate the liquefaction…
observed deformation mechanisms along with its embedded defects for various crystal systems. Information extracted should discern ideal crystal phases from other generated crystalline features during atomistic…
angle and billet and die materials on stresses, deformation, load requirement and die yielding in rod extrusion process are studied using simulation techniques. Based on these results, rod extrusion process
chip will all be simulated with FEM. The electrical impedance of the sensor simulated with harmonic analysis is compared with that measured by an impedance analyzer. Sinusoidal waves of various ... maximum deformation…
simulates high Cu(9.21%), S(23.24%) and Bs(13.81%) orientations. The results are shown for Cu, S, and Bs respectively. The combined Taylor model is able to predict the deformed
capacity and limitation of the plastic deformation demand to the surrounding frame structure. On this basis, a case study is performed using numerical simulations and reported in this paper
subjected to complex stress, strain, and deformation during operation. FEM is employed to model the structural behavior of these components, simulating real-world operational scenarios including lifting, lowering, and…
while temporary deformation disappears on the removal of the stress. Both temporary and permanent deformations can be functions of time or virtually independent of time. Processing and handling of intermediate…
model has been developed to simulate the fluid dynamics that occur when a nanodroplet falls onto a flat substrate. A numerical solution of the Navier–Stokes equation using a volume ... model deformation. Dynamic contact…
follow the Cauchy-Born rule. The purpose of this study is to analyze the deformation mechanisms of 2D crystalline nanostructures (graphene and silicene) under mechanical loads by using a kinematical ... based on…
follow the Cauchy-Born rule. The purpose of this study is to analyze the deformation mechanisms of 2D crystalline nanostructures (graphene and silicene) under mechanical loads by using a kinematical ... based on…
mechanics of the cell being deformed. In our current work, we present a finite sized dissipative particle dynamics (FDPD) model to simulate the dynamics of a capsule flowing through
relationship between bonding force and deformation of bumps and the relationship between bonding force and fragmentation of the chip by the simulation. And the finite element model is verified
during torsion test, in order to compare the structural evolution at high deformation. The deformation mechanisms and cementite stability was analyzed. The microstructural study was carried out applying light ... with…
deformation reduced elimination of nano-porosity mediated by grain boundary sliding with the assistance of the soft boundary phases. Finally, our recent observations combined with computer simulations reveals GB sliding…
deformable stable sphere. The bolus in action was once subjected to dry and viscous friction, and the inertia forces had been neglected. The results of simulations of motion patterns resembled ... biomechanical model…
been made to study hot deformation behaviour of a low alloy steel having 0.24% C and 1% Cr using thermo-mechanical simulator Gleeble 3800. Cylindrical samples of diameter
cable plane during rotation construction is simulated with the Midas/Civil program. The deflection and the stress of the bridge girder and the deformation of the pylon at different construction
models are developed in ABAQUS to simulate vertical uniform load of 3 kilo-Pascal (kPa) for elastic and 100 kPa for plastic deformation. Results from the analysis discussed and comparison
rational modes of blank deformation, which allows getting the blades without disrupting the continuity of the material is defined through computer simulation of the process of forging in flat
deformable solid sphere. The bolus in motion was subjected to dry and viscous friction, and the inertia forces were neglected. The results of simulations of movement patterns resembled those recorded
endless variety of such packing problems exists, including the packing of spheres, spheroids, rods, deformable bubbles, and many other shapes, where one may also consider packing them as densely ... solving packing…
orthognathic surgery is the standard treatment for the correction of dentofacial deformities, in order to get a stable dental occlusion and facial harmony. The advancement of technology and the evolution ... images…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.