were analysed for its dust and the crystalline silica contents using an X-ray diffractometer. A total of 226 underground workers were sampled from four underground operating shafts within which
that the sample with highest amount of hydroxylapatite (80.3%) is 120oC by X-Ray Diffractometer. The resulting Ca10(PO4)OH2 from previous result was then synthesized with various concentration
then measured. In addition, each saccharide was measured using a powder X-ray diffractometer and differential scanning calorimetry (DSC) device. We studied the association between the nanoparticles aggregation
ratio. The prepared nanocomposite scaffolds were characterized using scanning electron microscopy (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR) and BET studies. Also, degradation…
carbonate impurities was verified using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffractometer (XRD). Scanning electron microscopy (SEM) analysis of the powders showed that using ultrasonic…
nanohybrid materials were fully characterized by Fourier trans-form infrared spectroscopy (FTIR), X-ray diffractometer (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results…
profile of synthesized silver nanoparticles was evaluated by using UV-Visible spectrophotometer, X-ray diffractometer, energy dispersive X-ray spectroscope, scanning electron microscope and Fourier transform infrared…
sightsaw of phase structural characteristics of synthesized thin films samples through powder X-ray diffractometer and reveals that all the samples crystallize in orthorhombic structure. Also, phase examination
tubes will undergo torsional fatigue during application. Residual stress was determined using X-ray diffractometer and tube slitting method. Higher tensile residual stress of magnitude 200 MPa was observed
tubes will undergo torsional fatigue during application. Residual stress was determined using X-ray diffractometer and tube slitting method. Higher tensile residual stress of magnitude 200 MPa was observed
epitaxial layers was done using reciprocal space mapping performed with a tripleaxes X-ray diffractometer Smart Lab 9 kW and the following processing of data obtained within the linear theory
thin films were prepared onto glass substrate by Electron beam evaporation technique. X-Ray Diffractometer analyses showed that highly c-axis oriented and high-quality films were obtained on various
chemical method. Synthesized TiO2 and Co:La:TiO2 were characterized by X-Ray Diffractometer, SEM, TEM, UV- vis, FT-IR, Band gap energy and BET. The TiO2
Physicochemical properties of processed ibuprofen were analyzed using XRD, DSC, FT-IR, SEM, laser diffractometer and dissolution testing. Effects of extraction pressure, extraction temperature and nozzle diameter on…
crystalline structure and dielectric properties of samples were studied by D8 Discover X-Ray Diffractometer and Wayne Kerr Impedance Analyzer. Microstructural properties like crystallite size, dislocation density…
solid state diffusion method. Crystallographic characterization carried out by using powder X-ray diffractometer confirmed the single phase rock salt with average particle size in the range
layer was determined from the peak intensity using an X-ray Diffractometer (XRD) and mechanical properties of films were investigated by nanoindentation techniques. Characterization of the obtained films by atomic
Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used to identify the phases present. The improved properties were attributed
detected and the further analysis with UV spectrophotometer, FESEM and X-RAY Diffractometer were done for characterizing the Nanoparticles. Red colour Nanoparticles yielded highest absorbance at 400nm followed
synthesized materials single/ multi-phases crystallographic structures are verified from the X-ray diffractometer. The average size agglomerated nanocrystals/ particles is evaluated less than 10 nm from the Transmission…
Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used to identify the phases present. The improved surface properties were attributed
were characterized by optical microscope (OM) and scanning electron microscope (SEM/EDS). X-ray diffractometer (XRD) was used to identify the phases present. Results of the study revealed that
Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used to identify the phases present. The improved surface properties were attributed
both for calcined oyster shell and HA by scanning electron microscopy (SEM), X-ray diffractometer (XRD), fourier transform infrared spectroscopy (FTIR) and thermo gravimetric analyzer (TGA). The absorption bands…
have been characterized by UV-Visible spectrophotometer, Fourier- Transform Infrared spectroscopy (FTIR), X-ray diffractometer (XRD) and High Resolution Transmission Electron Microscope (HR-TEM). Antibacterial activity…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.