investigate the effect of swirl-type mixing vanes in the reactor core. Single-phase fluid flow equations are solved using the k-ε turbulence model by ANSYS
usage of reverse section HPLC. Separation of the drug was achieved on a opposite phase C8 column using a cell segment including phosphate buffer and methanol in the ratio ... stage become decided. Robustness for above…
detector. Method: Elution was carried out using a mobile phase-A and B consisting of HPLC grade and flow rate was set on 1 ml/minute at 310 nm wave ... Buffer) was used at pH 4.0 and mobile phase B (Methanol…
mobile phase containing gradient program with Pump A: (Acetonitrile: Methanol (50:50) v/v) and Pump B: (0.2% Formic acid in Milli Q Water (v/v)). The flow rate
Complete blood picture, peripheral blood smear, bone marrow study, flow cytometry, and genetic studies. Despite the known protocols and their phases, antibiotic prophylaxis might improve the diagnosis in selected cases
linear, accurate, precise, robust and rugged. The mobile phase used was acetonitrile:water (65:35) with flow rate of 0.8 ml/min. The pH was set to 2.5 using orthophosphoric ... single estimated parameters complied with…
phase composition consisting of 0.1 % trifluoroacetic acid, methanol, and acetonitrile in a ratio of 20:40:40 v/v/v. The system was regulated at a 0.7 ml/min flow
photodiode array detector. Mobile phase was in the ratio of (70:30 v/v) acetonitrile and 0.1N potassium di hydrogen phosphate. Flow rate of 1 ml/min was employed
mobile phase comprising buffer (e.g., phosphate buffer, pH 3.0) and acetonitrile in a suitable ratio under isocratic or gradient elution, depending on impurity resolution requirements.The flow rate was maintained
particle size). The mobile phase consisted of a mixture of phosphate buffer (pH 3.0) and acetonitrile in the ratio of 70:30 v/v. The flow rate was maintained
made up the mobile phase B combination. The optimum peak was obtained at retention duration of 15.73 min by maintaining a flow rate of 1.0 ml/min at a wavelength
Background: The Phase IV, open-label, single arm, prospective, non-interventional SANOIN study demonstrated that an oral fixed dose combination of ferrous gluconate, multivitamins and minerals (Sangobion® IRON+) was…
ammonium formate in water and acetonitrile as mobile phase in gradient elution mode at a 0.5 ml/ min flow rate. Quantification was carried out using triple quadrupole mass detection with
mobile phase. The analysis was carried out at the 248 nm wavelength, with a flow rate of 1.0 ml/min at which the drug showed a sharp peak. With ... injection volume, the isocratic pump mode was used for the analysis…
Multiphase flow simulation in porous media is a critical area of research with significant implications for various fields, including petroleum engineering, hydrology, and environmental science. The behavior of fluids…
reproducible simultaneous method for fosamprenavir calcium and nevirapine in dendrimer-carbon nanotube conjugates. Reverse phase column C18 was used for the development and validation of the high-performance liquid…
viability of HepG2. In addition, apoptosis studies were applied to measure cell apoptosis via flow cytometry. A large amount of apoptosis was observed in HepG2 cancer cells treated with plant ... Myrtus communis…
with orthophosphoric acid and column oven temperature 40°C. The flow rate of mobile phase was adjusted 1.0 ml/min. and the injection volume 10 µl. Detection was performed
thermal behavior of polymer-drug systems. By measuring heat flow as a function of temperature, DSC can detect phase transitions, such as melting, crystallization, or glass transition, associated with polymer