respectively. Also, the adsorption equilibriums were analyzed by the Langmuir and Freundlich isotherm models. Such equilibriums showed that the adsorption data was well fitted with the Freundlich isotherm model
equilibrium was attained within 15 min. Sorption data conformed well both Langmuir and freundlich isoterm model for Pb(II), while for Cd(II), the langmuir is better than the freundlich
understand the reaction mechanism. Adsorption isothermal data could be interpreted by the Langmuir and Freundlich models. The maximum adsorption capacity Q0 varies from
maximum adsorption capacity of 0.216 mmol g-1 for As (III) and a suitable Freundlich model for Cr (VI) respectively. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy
phenol from the bulk to the solid phase. The isotherm study indicates that Freundlich model favors most than Temkin and Langmuir models and hence it supports chemisorptions. The study
coefficients, the complexation adsorption of Fe(II) and Salen correlated well with Langmuir and Freundlich models. GC-MS, FT-IR and UV-vis data of the ligand and the complex
except the data obtained for HCH at 35 C which was best described by Freundlich model. The maximum adsorption capacities recorded for SCH (7.19-7.92 mgg-1) were higher than
experimental isotherm results were fitted using Langmuir and Freundlich equations. The Langmuir and Freundlich model agrees very well with experimental data. The maximumamounts ofMercury (II) and Chromium(III) adsorbed
investigated. The experimental isothermresults were fitted using Langmuir and Freundlich equations. The Langmuir and Freundlich model agrees very well with experimental data. The maximum amounts
determined and correlated with common isotherms equations. The smaller RMSE values obtained for the Freundlich model indicate the better curve fitting; the monolayer adsorption capacity of CB is found
experiments were performed in batch mode. The equilibrium data was fitted with Langmuir and Freundlich models. Several operation variables such as adsorbent dosage, contact time, initial pH, and temperature
first order, pseudo-second order and intraparticle diffusion rate expressions. Four parameter biosorption isotherm models, Freundlich, Langmuir, Dubinin – Radushkevich, Temkin are tested for their applicability. The…
from l0mg/g-50mg/g. While examining the bio-sorption efficiency, Langmuir and Freundlich models were used. The coefficient of determination (R2) for both isotherms were 0.996 and 0.994 respectively
pseudo-first order, pseudo-second order model as well as the intra-particle diffusion model. For structural elucidation, the materials were characterized using Fourier Transform Infrared (FTIR) and Scanning Electron…
considered as the limiting step of adsorption. The equilibrium adsorption data were modeled using Freundlich and Langmuir adsorption isotherms which both showed good agreement with experimental data. The highest removal
step. The equilibrium data for bleached and unbleached jute were adjusted to the Langmuir-Freundlich model indicating a considerable contribution to the chemisorption process in a monolayer fashion
respectively. It was discovered that the Langmuir sorption isotherm was more suitable than the Freundlich model. Additionally, HCl and NaH2PO4 extraction were used to evaluate the immobilisation of heavy metals
equilibrium studies were carried out, fitting the equilibrium data to both Langmuir and Freundlich models. Batch adsorption models, based on the assumption of the pseudo-first-order, pseudo-second-order
equilibrium were correlated by either the Langmuir or Freundlich equations. Results indicated that the Freundlich model gave a better fit to the experimental data than the Langmuir equation
showed that the experimental data were better descripted b y pseudo-second order and Freundlich models, respec tively. Because of low-cost, eco-friendly, non-toxicity and high sorption capacity
increasing in dye initial concentration and contact time. Absorption data for studied absorbent follows Freundlich model with regression coefficient of R2= 0.93. Processed walnut bark powder as an inexpensive
adsorption of MCP onto composites was well explained by Freundlich model. The kinetic studies suggested that the adsorption of MCP on composites proceeds according to pseudo-first order. Intraparticle diffusion
adsorbents were determined and correlated with common isotherm equations such as Langmuir and Freundlich models. The obtained correlation coefficient (R2) for different adsorbents (GO and GO@AS composite) suggested well
concentrations ranging from 10 to 50 ppm. The adsorption was quantified according to the Freundlich model and the results show that there is a linear relationship between
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.