Microstructure and Mechanical proferties of composite material used scrap aluminium can and waste glass fabricated by Spark Plasma Sintering
The most expensive part of metal recycling is the sorting process. Because
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
The most expensive part of metal recycling is the sorting process. Because
microstructure of conventional and nanomaterial Cu cold spray coatings is explored to understand why nanomaterial Cu cold spray performs better than conventional Cu cold spray in the contact killing ... have a much…
this study, mechanical, visual, and microstructure changes of geopolymer concrete incorporating untreated phosphate washing sludge (Ghantour, Youssoufia) were investigated. This process allows the recycling of a large…
sintering is a key process which governs the quality of the obtained microstructures and the final material properties.This control can be done through the optimization of the sintering trajectory
with the stated regulatory documentation. The article provides information on the application of the microstructural method for meat products quality control. The structural composition of sausage products was…
topography of the habitat in which they live. Many authors have suggested that the microstructure of the superficial surface of scales have undergone important adaptations and have functional value ... lizards. In this…
existing granite based aggregate. But the gain of strength depends on bonding characteristics at microstructural level between constituent materials. In addition, oil palm shell absorbs water 24% higher than that…
scanning electron microscope (SEM) and an infrared particle size analyzer. The chemical composition and microstructure of the synthesized TiZrNbMoV alloys were investigated using an X-ray diffractometer ... laser power…
varied in the range of 12 nm to 28 nm for NiO films. The microstructural analysis was carried out under a field emission scanning electron microscopy (FESEM) as well
ductility. The impact of SiC and Graphite reinforcement on mechanical properties and microstructure of Al-10Zn- 6,1Mg were investigated. Graphite was added with fraction ... characterized results showed with addition of…
sensor operating at room temperature (25°C) based on flower-like ZnO (FZO) microstructures were successfully fabricated by a CTAB-assisted hydrothermal process at 90°C. We report hydrothermal synthesis…
technique together with type of pre-acidification used acid on shreddability, texture profile and microstructure of the full fat cow’s Mozzarella cheese. Mozzarella cheeses were made conventionally from standardized…
anti-anemic and spermatogenic potentials. This study investigated the alterations in testosterone and testis microstructure following the administration of HAART(Zidovudine, Lamivudine and Levirapine [ZLN]), JT…
symptoms, involves structural and functional changes in the brain cortices. Further study on the microstructure of the brain using diffusion kurtosis imaging (DKI) is needed in patients with CRPS. This…
artificially ageing at 1500C, 1750C and 2000C for 6h, 10h, 12h and 15h on microstructure, hardness, corrosion and sliding wear behavior. Microstructural characterization for the heat-treated condition was carried
strength, durability in aggressive environment (acidic or basic environment) as well as on the microstructure of geopolymer
morphology of the ZnO microstructures for the formation of FZO. Figure 2: Sensing response of (a) 0.005 M CTAB concentration sample and of (b) samples of all concentration variations
morphology and impact strength in the bulk industrial pearlitic irons were investigated. Some novel microstructure features were revealed after the irons optimal heat treatment, namely: ferrite matrix with ultra-fine…
Migration of small molecules to, and across the surface of polymer matrices
For authors and organisers
Find the right journal for your paper and submit your manuscript.