Synthesis of Titanium Dioxide Nanoparticles by Sol-Gel Technique
diffractometer (XRD). The anatase structure of titanium dioxide was obtained after calcination. The microstructure was characterized by a Scanning Electron Microscope
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
diffractometer (XRD). The anatase structure of titanium dioxide was obtained after calcination. The microstructure was characterized by a Scanning Electron Microscope
real alloy was thereafter produced by casting from pure elements to allow characterizing the microstructure really obtained. Thermodynamic calculations predicted that solidification should start here too by TaC…
hardening heat treatment. The spray formed, age hardened and as-cast alloys were characterized by microstructure and mechanical properties. The microstructure of spray formed alloys exhibited finer and evenly distributed
pressing and thermal consolidated using vacuum sintering. The final phase composition and microstructure were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM/EDS), respectively, together…
themicrostructures of the alloyswere analysed by SEMobservations, DRX runs and image analysismeasurements to characterize the microstructure evolution from the initial as-cast state. This evidenced a rapid evolution of…
when the wished content in alloying element was 25wt.% or 50wt.%. The obtained microstructures were characterized by the presence of a double population of graphite particles. In the two highly ... which suddenly…
chemically and green methods from a plant extract of Coriandrum sativum and characterized for phase and microstructural analysis. The milk sample from subclinical mastitis cows was collected from the veterinary
sodium carbonate (Na2Co3) and calcium carbonate (CaCo3) on the powder morphology and microstructure. Synthesized particles are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). In addition…
joints welded by these two filler rods are presented. The weld joints were characterized for microstructure, mechanical and fracture properties. The microstructure of the weld interface showed presence ... Murthy, C S…
fibrous mats were successfully processed by electrospinning. The obtained systems were fully characterized in terms of microstructural, thermal, and mechanical and biological properties by observation at scanning…
polymers, encompassing spectroscopy, chromatographymass spectrometry, thermal analysis, and rheology. It highlights methods for characterizing polymer microstructures, degradation pathways, and surface properties…
also be needed. Current challenges remain for quick and accurate imaging of tissue microstructures and characterization of lesions that could be accomplished by the creation of longer circulation nontoxic contrast
blades of impeller. The investigation consisted of visual inspection, chemical analysis, characterization of microstructures using optical microscopes and hardness test. The quench pump impeller was made off cast iron…
deposit HA powder over the polyamide surface. SEM with EDX was used to characterize the microstructure and the chemical composition of the deposited layer. The crystallinity of layer was confirmed
bring information concerning the constitution of the external oxides while SEM examinations allowed characterizing the microstructure changes in the bulk. None of the five alloys showed a chromia-forming behaviour
samples were tested at room temperature for uniaxial compression and sample sections were characterized for microstructure properties using optical microscope and SEM (Scanning Electron Microscope).The effect of addition
Photodegradation. Transmission electron microscope (TEM), powder X-ray diffraction (XRD) were used to characterize the microstructure and morphology of the products obtained at various temperatures. The results of the…
powder X-ray diffraction (XRD) and Brunauer–Emmett–Teller (BET) were used to characterize the microstructure and morphology of the products.The results showed that the overall photocatalytic activity of TiO2
TiB2 and Ag-8wt% SnO2 contact materials were fabricated by powder metallurgy. The microstructure was characterized, and the relative density, hardness and electrical conductivity were measured. The arc erosion
separation method was applied to generate micro porosity in the developed membranes and characterized for microstructure and morphology by SEM, EDX, XRD and FTIR analysis. The average pore size within
In this article the preparation, microstructure, dielectric and piezoelectric properties of lead
with a 5 min holding time. The sintered composites were then characterized with respect to their densification, microstructure, oxidation behavior and mechanical properties change with the combination
Because of the non-equilibrium thermodynamics associated with metal AM and the varying microstructural scales, the characterization techniques are important. This presentation examines various applicable metallurgical…
with the I-1 ions present in the chamber and produce CuI nanoparticles. Various characterization techniques were employed to study the properties of these CuI nanoparticles the structural ... used to record fluorescent…
were elaborated by induction foundry under inert atmosphere, then characterized in the microstructure field and in hardness. The obtained microstructures effectively show dendritic matrixes and interdendritic HfC…
For authors and organisers
Find the right journal for your paper and submit your manuscript.