done using the Isomet saw. The push out bond strength was done using universal testing machine working at a speed of 0.5 mm/ min. Data were analyzed using
three levels apical, middle and cervical. The bond strength was measured using computerized universal testing machine each section fixed in the machine so that the load applied from apical
them in shear mode by using a shear knife-edge blade in a universal testing machine (Instron Corporation, Canton, MA, USA) with a crosshead speed of 0.5mm/ second
were tested at preimmersion (baseline), 3rd, 7th and 14th day post-immersion period. Universal testing machine was used to test the selected mechanical properties. Results: The distribution of mean baseline
seconds, the shear bond strength of all specimens was determined with a universal testing machine at a crosshead speed of 1 mm/min until bond failure occurred. The adhesive remnant
self-adhesive resin cement Rely X™ U200, and then tested with computer controlled Universal testing machine (Laryee, Beijing, China) and the mode of fracture also has been noted. Results
upward free direction. Mechanical properties at room temperature were measured using a universal testing machine (Ametek, Lloyd). The compressive strength was determined by ASTM D 1621 at a crosshead speed
subjected to bond strength test. Microtensile bond strength was determined using a universal testing machine at a crosshead speed of 2 mm/min. Statistical significance was determined by T-test
strength of microtensile bonding was measured using the universal testing machine. The data were analyzed using one-way ANOVA followed by post hoc Tukey test (p<0.05). The results
samples were placed in a specially fabricated jig, which was held in a universal testing machine. The samples were subjected to shear stress until they fractured and the readings were
behavior of thermal stability were enhanced. Mechanical properties were calculated by tensile universal testing machine. All results data showed well dispersed of MWCNTs in polymer matrix at all weight percentages
ghatti incorporated blend films were evaluated by using Scanning Electron Microscope (SEM) and Universal Testing Machine (UTM). SEM micrographs of the blend system showed initially good miscibility and homogeneous phase
divided into two groups. The shear bond strength was performed by using the Universal Testing Machine (Instron 5566 Test Bench) and the results were recorded in megapascals (MPa). The Adhesive
completely. Each sample was then exposed to fracture test utilizing a universal test machine, the data were analyzed statistically with one-way ANOVA test, two-way ANOVA test and Dunnett
Then they were subjected to compressive strength test using the Universal Testing Machine (STM- 20) (SANTAM) with 2 N initial force and 0.5 mm/min blade speed). The compressive strength
group containing 10 specimens was subjected to shear bond strength testing using Instron universal testing machine For shear bond strength testing 30 tooth were bonding, 10 tooth in each group
shear bond strength evaluation, the specimens were subjected to shear test under Instron universal testing machine. One way Analysis of Variance (ANOVA) was used for multiple group comparisons followed
cement. All cemented crowns were subjected to compressive axial loading in computer-controlled universal testing machine (LARYEE, China) at crosshead speed of 0.5 mm/ min until fracture occurred. The data
hybrid composites were investigated byusing Thermo gravimetric/Differential Thermal (TGA/DTA) analyzer and Universal Testing Machine (UTM) machinerespectively and compared with those of pure PP and also with each other
membranes were analysed using scanning electron microscopy, atomic force microscopy and universal testing machine (UTM), respectively. The unirradiated composite membranes reinforced with ND of 10 nm was observed to have
specially designed pull out tests and spectroscopy, static mechanical tests using computer controlled Universal Testing Machines, drop mass impact tests and post failure microscopic analysis reveal the relationship…
hypochlorite and Dettol personal care solution. Bond strength were carried out in a universal testing machine with crosshead speed of 0.5 mm/min. Data analysis was done using independent sample
specimens were embedded in acrylic resin and tested in a Universal Testing Machine. A compressive load was applied at a 90-degree angle until fracture at a crosshead speed
between 5 and 55±C. Micro-shear bond strength test was performed using universal testing machine until bonding failure. Failure modes and fracture surface topography will be evaluated with scanning
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.