adsorbents/catalyst for siloxane removal in lab-scale adsorption tests of siloxane D4. Wet oxidation processes were used for the regeneration of the spent zeolite samples, including ozonation and Fenton ... complete…
isopropylacrylamide) (PNIPAAm) were prepared by emulsion polymerization. There were 5 samples composed of different amount of initiators and catalysts for emulsion polymerization. The changes of particle sizes of each…
been implemented for the produced biodiesel samples. The obtained results clearly show the highest conversion of 99% for 6% KOH catalyst. The results revealed highly potential of theses catalysts
methyl orange, methyl green and methyl blue as organic samples in sewages of chemical industries in presence of photo catalysts was investigated. The effect of different parameters such
sulfones were mostly removed by the used adsorbents. The catalyst was used for elimination of total sulfur in three real samples of diesel oil containing different concentration of sulfur ... Regeneration of the used…
present study compares the oxygen reduction reaction (ORR) performance for iron-nitrogen coordinated catalysts supported on carbon (FeNC) in acidic and alkaline electrolytes. The ORR activity of the synthesized FeNC…
some elements which related to the residue of the catalyst as indicated in the EDX analysis. The dimensions of this sample were the average length of carbon nanotubes which ... nanotubes with low diameters and number of…
effluent charge along with the catalyst was heated to the desired temperature with constant magnetic stirring and the liquid samples were withdrawn at definite time intervals for analysis. The liquid ... sample was…
doped ZnO powder samples were synthesized by mechanochemical technique that is rapid, economical and appropriable to industry. Catalyst fabrication process consists of two steps. Firstly, precursors are grinded and…
optimized catalyst was reused successfully for transesterification reaction up to 5 cycles without any significant loss in activity. Few physicochemical properties of the prepared biodiesel sample have also been studied
alkanes, alkenes, aromatics, and some halogenated volatile organic compounds. In this work, noble metal catalysts (Pd, Pt, Ru, and Rh) were prepared and evaluated in the catalytic oxidation chlorobenzene ... catalyst…
nanoparticles decorated reduced graphene oxide sheets (GFC). The catalyst was characterized by FT-IR, UV/Vis, XRD, SEM and vibrating sample magnetometer (VSM) techniques. The synthesized GFC-[Mn(salan ... such as…
materials research and development laboratory. Researchers can now better understand material behavior by analyzing samples in real-world gas or liquid environments, at high temperature and with ultra-low noise…
test of catalyst. The tandem micro reactor system consisted of two furnaces in series and is online coupled with a conventional GC/MS. Gas, liquid or solid samples ... micro-syringe, micro feeder, or sample cup for gas…
cement industry. These alternatives of managing spent catalyst were recommended to be followed in a sequential order by priority, based on the sampling and analyses requirements. A criterion for selecting ... best…
dibutyl tin dichloride catalyst. The copolymer immobilized open tubular capillary column resulted in the separation of about 40 peaks out of tryptic digest of cytochrome C sample in capillary electrochromatography
reaction temperature of 180 Ã?°C for 8 h, at which the catalyst exhibits the highest photocatalytic activity with 98.5% degradation of pirimicarb after 10 h of irradiation. Moreover ... spectrometry is applied to the…
nitrate solutions in the midst of citric acid as catalyst. X-ray diffraction (XRD) analysis reveals that all the samples posses a single phase cubic spinel structure. The dielectric parameters
using mordenite zeolite as a solid acid catalyst. Mordenite was synthesized in the laboratory by hydrothermal method, after dealumination and calcination, the sample was characterized by different techniques such…
EtOH:H2O at 50-60°C. The catalyst was prepared by simple co-precipitationmethod and calcined at 500°C. The calcined powder sample was characterized byXRD, FT-IR, SEMand ... synthesis of 5-arylidenemalononitrileswith…
Phillipsite Zeolite as a solid acid catalyst. Phillipsite was synthesized in the laboratory by hydrothermal method, after dealumination and calcination; the sample was characterized by different techniques such as…
most of the physical properties, is the porosity. Porous materials are commonly used as catalyst supports in the processesof oxidation, hydrogenation and dehydrogenation at high temperature,corrosion in feed processing…
most perfoming Ni loaded samples were characterized by Raman spectroscopy, XRD, FESEM, EDX and H2-TPR analysis. The catalytic activity of 10% Ni loaded catalysts was found to be highest
Ferrite catalysts of Nickel, Cobalt and Copper were prepared by co-precipitation hydrothermal route and were impregnated with Palladium, Cerium and Lanthanum as promoters. These were characterized and found ... Bothe…
prepared inexpensive magnesium oxides have high potential as catalysts for photo degradation of both Malathion and orange G from water samples. Inhibitory activity against Breast Carcinoma MCF-7 cell line
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.