Nanocrystalline NixZn1-xFe2O4 ferrites (with x = 0.1,0.3,0.5,0.7,0.9) were synthesizes by sucrose process.The powders were sintered at 900 0C for 12 h to densify properly.The samples were
were modified by CoFe2O4, results of adsorption indicated that RS treated with CoFe2O4 spinel ferrite nanoparticles appeared to be more efficient to remove heavy metals from waste water. Where
structural and magnetic properties of graphene and CNTs mixed with nanoparticles of inverse spinel ferrite prepared by a 1-step ultra-sonication method. The nanosize inverse spinel ferrites show ferrimagnetic…
structural, electrical and magnetoresistive properties of manganese doped cobalt ferrite nanoparticles have been investigated through measurements of dc and ac magnetic properties. The samples were synthesized via…
this report, the E. coli detection method was developed by using glycine coated cobalt ferrite nanoparticles (Gly/CoFe2O4 ) as a collection probe from the drinking water sample. The Gly/CoFe2O4
process of cobalt ferrite synthesis by means of confined impinging jets was studied experimentally at relative low temperatures (20°C to 30°C) and ambient pressure. Unlike hydrothermal synthesis usually
great potential for simultaneous bioimaging and drug delivery. In the present study, mixed ferrite (MnFe2O4) were coated with a mesoporous silica and polyethylene glycol (PEG), making them water soluble
current study focuses on Barium based rare-earth terbium (Tb3+) substituted M-type hexagonal ferrite materials with nominal composition BaTbxFe12-xO19 (x=0.00, 0.10, 0.20, 0.30) synthesized using ... investigate its…
delivery, magnetic resonance imaging and magnetic fluid hyperthermia. In this work, different sized cobalt ferrite nanoparticles (CFNP) were synthesized with narrow size distribution, by using chemical precipitation…
doped Ni-Zn ferrite powder with chemical formula Ni0.5Zn0.5Fe2- xCrxO4 (0.1 ≤ x ≤ 0.4) was synthesized using With Out Water and Surfactants (WOWS) sol-gel method. The variation of electrical parameters
Nickel ferrite, NiFe2O4 nanoparticles (NFNPs) have been synthesized by chemical co-precipitation method. To enhance biomaterial potential of nickel ferrite NPs, their surface was tuned with biocompatible food grade…
Composites of Hard (Sr2Co2Fe12O22) and Soft (CoFe2O4) ferrite are prepared. First individual ferrite powder prepared using coprecipitation technique. The prepared precursors were pre-heated at 500Ã?ºC followed by final…
Pure and Pr doped multiferroic samples of bismuth ferrites (BFO) were successfully synthesized by the sol-gel technique. Detailed investigations were made on the influence of Pr on structural, electrical
Dissimilar welding of 316L stainless steel-low carbon ferritic steel joints made using pulsed Nd: YAG laser beam. The laser spot symmetrically focused on the butt joint and offset
Reduced Activation Ferritic/Martensitic Steel (RAFMS) is used as a structural material in fusion energy systems. It is presently under development by several laboratories for the Indian Test Blanket Module
Bismuth ferrite nano particles were prepared by sol-gel route using solutions of iron nitrateand bismuth nitrate. The produced powder was dried at 150ºC for 2 h and then calcined
Dextran Coated Ferrite Nanomaterials (DFNM) of size <25 nm was synthesized, characterized and the acute oral toxicity along with antioxidant enzymes activities were evaluated in Wistar rats. The healthy adult
MNPs @ DMSA were evaluated. For this purpose, at first the characterization of Cobalt-Zinc Ferrite Magnetic Nanoparticles (CZF-MNPs) coated with biocompatible Dimercaptosuccinic Acid (DMSA) was investigated using of…
Polycrystalline spinel ferrites with general formula ZnxCu1-xFe2O4 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0) were prepared by oxalate co-precipitation method. On characterization by X –ray diffraction, they
function of composition, frequency and temperature for a series of Cu1+XTixFe2-2xO4 ferrite samples prepared by using conventional ceramic technique. Initial Ti4+ ion substitution results in decrease in dielectric
properties such as B-H loops and initial permeability ìi for the polycrystalline soft ferrite, Cu1+xGex Fe2-2xO4;with x=0.0, 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3 have
ferritic steel was obtained with different states of plastic deformation by traction test.Metallographic sampleswere prepared for opticalmicrostructure examination, Vickers indentation tests and corrosion tests in a…
high opacity and heat resistance, we carried out experimental investigations with calcium ferrite microparticles (CaFe2O4 MP) aiming to identify chromosomal aberration, which could be transmitted to the next plant…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.