These results showed that Pseudo second order kinetic model best describes the process and the Mechanism of adsorption show that both 150μm and 250μm were film diffusion controlled. This will
temperature. Tinosporacordiofolia stems extract (TCSE) acted as an anodic type inhibitor and underwent physical adsorption process on the surface of the metal and followed Langmuir adsorption isotherm
ions is order 1 and order 2, whereas the process of adsorption-fluidization is spontaneous. The parameter thermodynamics are ΔH= 468.8347 J mol-1adsorbate ... process adsorption-fluidization was following Freundlich…
influences of pH, initial concentrate of PMIDA, contact time and temperature on the adsorption process were investigated. The results showed that the adsorption capacity of AlD301 reached the maximum when ... data…
factorial experimental design technique has been used to investigate the adsorption of Bismarck Brown-Y (BBY) from wastewater onto agricultural waste Areca Husk Carbon Fibre (AHCF). The Factorial Design ... adopted for…
removal of Cd(II) from aqueous solution under different experimental conditions. Effect of various process parameters, viz., initial metal ion concentration, agitation time, initial solution pH and adsorbent dose…
present study, the adsorption carried out to test the suitability of Chondruscrispus powder as an adsorbent for the removal of chromium ions from aqueous solution. The equilibrium studies are systematically ... covering…
Eichhornia crassipes and other terrestrial Canna indica are used as adsorbents to study the process of biosorption. The studied plants have not gained much importance and are found in abundance ... four heavy metals…
rapidly developing nanomaterials-processing technique of electrospinning provides a unique and straightforward way to prepare continuous fibers at nanometer scale. As an exciting new nanomaterial, polymer nanofiber mats…
adsorption parameters such as pH, temperature, contact time, adsorbent dosage, and ionic strength. The adsorption process using modified FC (PFC) was evaluated under isothermal conditions and Langmuir model showed…
themain problems encountered bymost of the industries. In order to optimize wastewater treatment process, low cost materials are required with high pollutant-removal efficiency. In this study Mesoporous silica…
adsorption process is an effective technique for the treatment of heavy metals. Activated carbon, a representative adsorbent, has been widely used to remove diverse pollutants, including cationic heavy metals ... metals…
fits well for the Langmuir, Redlich-Peterson and Sips adsorption isotherms. The Langmuir monolayer adsorption capacity of CLSC was found to be 142.86 mg/g. Thermodynamic parameters such ... have also been evaluated and…
These are thought to bind As (+5) readily than As (+3). The overall adsorption depends greatly on pH. Metal oxides such as the ones of hydrous ferric, manganese and aluminum ... species into the environment. This review…
kinetic was better fitted compared to pseudofirst- order kinetic. Thermodynamic experiment indicated that the adsorption process was exothermic with ΔH equals +27.84 KJ/mol and ΔS equals -0.993 KJ/molK
rate and concentration was studied at modified carbon paste electrode. The electrode process was found to adsorption and diffusion controlled and the detection limit was found
purity of the steroid. In the analytical methods presented, the Through Oven Transfer Adsorption Desorption (TOTAD) interface was used to couple the last clean up stage of LC with GCâ ... which can be considered very…
solution so as to determine the effects of the composition of the solution on adsorption process. The sawdust was characterized using Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR)…
activation (TAB), acid activation (AAB) and combined acid and thermal activation (AAB/TAB). The adsorption process was characterized by FTIR and BET. The results showed that the combined acid ... that of all other types…
poly-phenols from olive mill wastewater in a batch reactor as monitored by adsorption using tow natural materials, namely sand and commercial starch. It was found that for the same ... contact time and initial pH)…
rate, concentration and adsorbent dosage have been studied. Isotherm adsorption were measured experimentally. Maximum adsorption of dye was 23.6310 mg/g achieved at pH 2, contact time 120 minutes, stirring ... provide…
condition, adsorption capacity of blend silica gel-CMChi-B yield 92.70%. The adsorption-fluidization was not spontaneous process, but it was a regularity process which the type of Langmuir isotherm
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.