Three types of caprine milk Cheddar cheeses as non-fortified control cheese (CC), regular ferrous sulfate (RFS) and large microencapsulated ferrous sulfate (LMFS) fortified cheeses were manufactured in three batches…
having chamber saturation for 30 min at room temperature. The mobile phase was run upto 8cm. The dipping agent sprayed on plate for determination of dicyclomine hydrochloride and plate scanned ... quantitation of the…
toxic precursors under low temperature hydrothermal conditions. In this method, FeCl3 and FeCl2.4H2O were used as iron sources and NH4OH was added for controlling the pH value and oleic acid ... studied at room…
total run time was 10 min and the column was maintained at ambient temperature. The retention time of Indapamide was 3.233 min. The standard curves were linear over the concentration ... reliable and reproducible. Hence…
total run time was 10 min and the column was maintained at ambient temperature. The retention time of Rupatadine fumarate was 7.350 min. The standard curves were linear over ... reliable and reproducible. Hence the…
adjusted to3. Flow rate was maintained at 1 ml/min at an ambient temperature. Quantification was achieved with ultraviolet (DAD) detection at 255 nm. The retention time obtained for Atazanavir ... accurate, rugged…
wavelength at 220nm respectively and the column temperature was maintained at 45°C. The capability of stability indicating method developed was demonstrated by studying the degradation products generated during ... used…
viscosity and temperature of crude whey(acid and soft) following treatment by microwave (2.45GHz, 800W) and secondly to estimate their emulsifying properties and the kinetic control of the size
tricalcium phosphate ( -TCP) and monocalcium phosphate monohydrate (MCPM), in aqueous solution with a controlled pH, leading system to transform towards other calcium phosphates known by their very wide including…
inhibition efficiency values were significantly increased with increasing both concentration of each inhibitor and temperature. Polarization measurements showed that the studied inhibitors are mixed type with…
wavelength at 230nm respectively and the column temperature was maintained at 45°C. The capability of stability indicating method developed was demonstrated by studying the degradation products generated during ... used…
rate was set at 1.0 mL min-1, wavelength at 210nm and the column temperature was maintained at 25°C. The capability of stability indicating method developed was demonstrated ... used for the determination of synthetic…
wavelength at 220nm respectively and the column temperature was maintained at 45°C. The capability of stability indicating method developed was demonstrated by studying the degradation products generated during ... used…
wavelength at 225nm respectively and the column temperature was maintained at 45°C. The capability of stability indicating method developed was demonstrated by studying the degradation products generated during ... used…
from room temperature to 700oC by two probe method. These ferrites show higher resistivity than those prepared by conventional ceramic method. This is attributed to the control over composition
efficacy and tolerability of both these drugs. Methods-It was a prospective, active treatment controlled study with follow up to 72 hours done over a period of 2 months after ... pediatric patients with fever admitted…
bromide (CTAB) and hydrazine hydrate as the surfactant and reducing agent, respectively, under low temperature are investigated. The size and shape dependent structural properties of as-prepared 1D structures ... using…
temperature effect was investigated and leads to the determination of thermodynamic activation parameters. Electrochemical impedance spectroscopy result exhibit one capacitive loop indicating that, the corrosion…
acidified (0.05% HCl) methanol ( at ambient temperature) as the extraction solvents, respectively. The capsaici noids contents in the extract of eight chilli sampl es were found in the range ... respectively, with…
Theobromine inhibitor increases with increase in concentration of inhibitor and decreases with increase in temperature. The inhibitor show corrosion inhibition efficiency of 90% at 1g/l and 308 K. Polarization…
Potentiodynamic polarization data suggests mixed-mode of corrosion inhibition with predominant control of cathodic reaction. The studied inhibitor follows Langmuir adsorption isotherm. Data, obtained from EIS…
deposition technique. Two important deposition parameters such as substrate temperature and oxygen partial pressure during the thin film deposition were controlled. Systematic characterizations like RBS, SEM, TEM and…
employed on symmetry Shimadzu LC-20 ATVP Kromasil C-18 column at ambient temperature. The mobile phase consisted of Methanol: 0.01MPotassium di hydrogen Phosphate ... validated as per the ICH guidelines. The method was…
nanoparticles at ambient/low temperature, where Ajwain (Carom – Trachyspermum ammi) seed extract functions as the zinc salt reducing agent. Different synthesis conditions provide control of particle size and…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.