permeation and ionic interaction with the fixed charge groups of the membrane skeleton. Scanning Electron Microscope (SEM) images of the membrane have also been presented
Undoped zinc oxide (ZnO) thin films were deposited on microscopic glass substrates by a chemical technique known as ‘Successive Ionic Layer Adsorption and Reaction’ (SILAR). The technique involves multiple ... Surface…
obtained was determined by X-ray diffraction (XRD) measurement, thermogravimetric analysis(TG-DTA),scanning electron microscope(SEM),and high resolution transmission electron microscopy (HRTEM). The synthesis method…
were repeated in 20% fly ash slurry adjusted to the above pH values. Scanning Electron Microscopic study of mild steel and cast iron before and after corrosion ... cast iron at pH 6 with the order pH 6 > pH 8 > pH 7…
interaction of Melamine with Cyanuric acid was systematically studied by Powdered XRD and Scanning Electron Microscope. The result of this work contributes to understanding the biological effect of Melamine
septum also develops fibrous thickenings. Pollen grains dispersed as monads or single grains. Scanning Electron Microscope (SEM) studies of pollen grains have shown that exine surface is tectate with
deposited film was characterized by X-ray diffraction, optical absorption, electrical, conductivity, scanning electron microscope and EDAX measurements. The film was polycrystalline in a single cubic phase with average
amorphous glass substrate. The surface morphological properties of films were evaluated by XRD, Scanning Electron Microscope (SEM), EDAX, Transmission Electron Microscopy (TEM) and optical microscopy. The electrical…
absorption also. Further, it was conformed by X-ray diffraction and Scanning electron microscope (SEM) analysis. The differences in fluorescence lifetimes may indicate the structural changes induced
nanoparticles (QCS NP) were prepared using the ionic gelation method and characterised using scanning electron microscope and zeta potential analyzer. The minimum inhibitory concentration and minimum bactericidal…
adsorbent have been determined using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM) and X ray diffractometer (XRD). Batch experiments were performed to observe the effect
bacterial cell count, chemical oxygen demand (COD), degree of disintegration COD (DDCOD), scanning electron microscope (SEM), optimum density (OD) of cells and reactive oxygen species (ROS). Result shows significant
resin. Characterizations of the polymer using Fourier Transform Infrared (FTIR), Thermogravimetric analysis (TGA), scanning electron microscope were performed. The sorption potential of polymer for removal of Cs+ from…
using Fourier Transform Infrared spectroscopic (FTIR) analysis. The surface morphology was studied by scanning electron microscopic (SEM) studies. The percentage of yield, surface associated drug content, drug…
melt mixing using a single screw extruder. Miscibility studies were done using Scanning Electron Microscope (SEM) and thermal characteristics were determined using Differential Scanning Calorimeter (DSC). Mechanical…
blend films including morphology, secondary structure and thermal decomposition were investigated by using scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectrometer and thermogravimetric…
method and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The adsorption performances of KZnFc to Cs+ in aqueous solution and simulated oilfield water were investigated
activation methods; they were characterized using Brunauer- Emmett Teller (BET), Fourier TransformInfrared (FTIR), Scanning Electron Microscope (SEM) and proximate analyses respectively. Their efficiencies were tested…
solution method. The corresponding morphology, structure, and chemical composition were investigated using scanning electronmicroscope, transmission electron microscope, X-ray diffraction and EDX. The XRD patterns, SEM…
which ismuch larger than the bulk band gap value of PbSe material. The scanning electron microscopic images show the surface morphology of the Pb-Se bilayer films
texture development in foods containing plant protein ingredients. Microstructural assessment was performed using scanning electron microscope. The influence of pH (6, 10) and 0.15Mdithiothreitol on themolecular forces…
core nanoshell was characterized by UV-Visible spectroscopy, FT-IR spectroscopy, Scanning Electron Microscope (SEM), Energy Diffusive Spectroscopy (EDX) and X-ray Diffraction analysis. The antibiotic Gentamycin was…
testing machine (Instron 4444). PMMA (polymethylmethacrylate) cylinders were used as shear bodies. SEM (scanning electron microscope) images were taken to compare the effect of the conditioning methods
zinc blende structure. Morphology of the prepared sample was characterized using a scanning electron microscope (SEM). Surface characterization of the nanocrystals has been done by FTIR spectroscopy