This paper addresses the influence of Stearic Acid (SA) on setting time and compressive strength of cement mortar. Till now, researcher used SA as a grinding additive (powder form) with ... weight of cement. The little…
that the wet sludge retarded the strength development and has more adverse effect on compressive strength than the other dry sludge for the same percentage as the average strength loss
technological properties such as bulk density, water absorption and suction, apparent porosity and compressive strength. The results have shown that the optimum sintering temperature is 900 ºC. About this temperature…
conditions of ball milling and consolidation were investigated. Researching shows the dependencies of compression strength a of bulk composites on the milling duration and consolidation temperature. It was also observed…
bricks that are on the edge of meet the values of water absorption and compressive strength established by UNE standards. Therefore, the addition of 10 and 20 wt % of olive ... bricks with a bulk density of 1635 and…
references, utilizing the Proctor test techniques. Foreach pressure test, four boundaries are resolved: the compressive strength, theinitial digression modulus, the secant modulus at greatest pressure and the pinnacle…
organic dry sludge was used in making sludge concrete cube specimens as additive . The compressive strength of sludge concrete for treated water was compared with the strength of sludge concrete
experimental investigation is to study the behavior of a pier based on variations in compressive strength due to partial replacement of cement with metakaolin in order to attain maximum stiffness
with regular steel rebar. From the tests and study, the compressive strength and water absorption of the concretes cured with fresh water is better performance than those cured with seawater ... have an OPC and no…
experiment aimed to assess changes in the mechanical and physical properties of limestone, including compressive strength, porosity, and water absorption. The results indicated that bacterial biopolymers significantly…
hand, and the mechanical performance normally the porosity/the capillary absorption/the compressive strength, and durability of mortar or concrete in the hardened state has been improved on the other
local and imported cements to determine physical properties such as thickening time, fluid loss, compressive strength, free fluid and rheology were conducted at bottom hole circulating temperature
height (), position of the opening along the beam axis (X), type of concrete, ultimate compressive strength () and reinforcement arrangement around opening. The wide range for these parameters was taken ... ultimate…
mixtures were burned at 1450°C for 2 hrs. The results showed that the compressive strength and flexibility strength of the pastes were a little better than the plain sample
with 10% calcined SCBA on the properties of produced cement pastes were analyzed using Compressive strength measurements, XRD, FTIR, and SEM techniques. The spectroscopic techniques were performed
60.Tests were carried out to find out the compressive strength, density, water absorption and sorptivity of mortar specimens prepared by partial replacement of natural river sand using groundnut husk
Curie balance method and this has been related to changes in setting time and compressive strength measurement. The results illustrate to facilitate the magnetic susceptibility increases with increasing metakaolin…
elastic collagen structure, the 3D-printed ceramic structures were post-treated by polymeric infiltration. Compressive Strength analysis (CS) confirmed the positive impact of an elastomeric phase on mechanical properties
material, the present paper reviews various waste materials at different levels in construction material. Compressive strength of concrete and mortar incorporating different waste materials is reviewed and…
activators. In the present investigation, it is proposed to study the mechanical properties viz. compressive strength, split tensile strength of low calcium fly ash and GGBS based geopolymer concrete. These
depending on the region but are acceptable for medium-sized structures. In fact, the compressive strength at 28 days is mostly greater than 24 MPa. The tensile strength varies from
span. The results showed that the addition of glass fiber significantly improved the compressive strength, split tensile strength, flexural strength, shear stress and ductility of reinforced moderate deep beam without
vitro properties of flow, working and setting times, film thickness, dimensional stability, solubility, radiopacity, compressive strength, and freedom from lead and arsenic. In vitro tests of fluid flow were conducted
with QTH and LED light curing units for 40 seconds. The comparative evaluation of compressive strength, surface hardness and depth of cure were done with Instron machine, Vickers hardness testing
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.