increasing of initial concentration of Cu (II) and Cd (II) solutions and followed the Freundlich model and pseudo second order kinetic mechanism. Desorption of metal ions was accomplished with
adsorption behavior of the bacterial strains was better explained by Langmuir isotherm rather than Freundlich model. Results of FTIR spectra on surface binding of As revealed major spectral changes
followed pseudo second-order kinetics and was mainly controlled by chemical reactions. The Langmuir-Freundlich model matched the experimental data best for P adsorption. The maximum amount of P adsorbed
toluene vapor on both the activated carbon and silica gel matches the Langmuir-Freundlich model. The vacuum desorption tests were carried out to recover the absorbed VOCs. Results demonstrate that
removal of cadmium from wastewater and the adsorption data was correlated to Langmuir and Freundlich models. Experimental results showed that microwave radiation time and microwave power have significant effects
kinetic results of adsorption are described better by using the pseudo-second order model. Freundlich and DR equations provided better compatibility than Langmuir equation. The thermodynamic parameters obtained indicate…
concentration, contact time, and temperature was also investigated. Both the isotherms, Langmuir and Freundlich models exhibited excellent fit to the equilibrium biosorption data. The maximum monolayer biosorption…
isotherm for dye adsorption was investigated and from the obtained results it was follows Freundlich model. The activity of the synthesized AC on dye removal was compared with
equilibrium adsorption data of famotidine by grafted nano-sorbent were analyzed by Langmuir and Freundlich models. The sorption capacity of the nano-sorbent was 116 mg.g-1 at an optimum
equilibrium adsorption data of famotidine by grafted nano-sorbent were analyzed by Langmuir and Freundlich models. The sorption capacity of the nano-sorbent
solution. The results of adsorption were fitted to the Langmuir and Freundlich isotherms. The Freundlich model represen ted the adsorption process better than Langmuir mod el, the exploitation of these
factors controlling the adsorption process of Cd(II) were tested. Langmuir and Freundlich models were used to analyze the isotherm data. The equilibrium data fitted well Langmuir isotherm
biosorbent mass 0.1 g and contact time 15 minutes. Langmuir and Freundlich models have value of R20.9879 and 0.9263, respectively. This result showed that Langmuir model was better to describe
best condition in order to achieve the optimum biosorption capacity. Isotherm Langmuir and Isotherm Freundlich model were used to check conformity of adsorption process. Morphological change and functional groups that
dyes. The kinetic study obeys pseudo second order and the isotherm study fits with Freundlich model for both acidic and basic dyes. The percentage removal of Acid Orange 7 onto
contact time of 40 minutes and temperature of 50°C. Appropriate adsorption isotherm models namely Freundlich isotherm models with correlation coefficient
muricata L seed powder has porous and provide for dye uptake. Isotherm Langmuir and Freundlich model were indicated that the process adsorption was physic adsorption and adsorption process was pseudo
experiments were performed in batch mode. The equilibrium data was fitted with Langmuir and Freundlich models. Several operation variables such as adsorbent dosage, contact time, initial pH, and temperature
adsorption of Cd(II) sawdust. The experimental data were analyzed by the Langmuir and Freundlich models of adsorption and the results fitted well to the Langmuir isotherm. The maximum adsorption
were 89.1% and 99.6%, respectively. Isotherm process was well predicted by Freundlich model when adsorption Sb3+ by using HNO3 modified zeolite, and the Langmuir model fitting the equation well when
adsorption efficiency was 99.0%. The analysis of equilibrium isotherms data was used Langmuir and Freundlich models. The kinetics adsorption of DMP can be described by the Lagergren pseudo-second-order
Freundlich adsorption isotherms were applied to the experimental data. The data best fitted the Freundlich model. It was found that the aniline removal efficiency by using clinoptilolite-rich tuff
phenol on the slag can achieve at pH = 6−8. Two famous adsorption models, Freundlich and Langmuir equations, were adopted to analyze the liquid-phase adsorption behavior, showing good correlations
adsorption reaction of fluoride ion in water. Adsorption isotherms fitted the Freundlich model. The adsorption kinetic fitted well the second-order dynamics model
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.