Lead oxide (PbO) thin films were deposited onto glass substrates using chemical spray pyrolysis (CSP) technique. The effect of substrate temperature on the structural and optical properties of PbO thin
composite oxides of (WO3)1-x(MoO3)x thin films were deposited by spray pyrolysis method. Microstructural and electrical properties of the films as-deposited and after annealing at different
oxide transparent thin films have been deposited on glass substrate by a chemical spray pyrolysis (csp) technique. Surface investigations such as XRD and AFM, and patterns of the films were
thorough assessment has been made of the characteristics of bio-oil from fast pyrolysis of biomass. Fast pyrolysis uniquely gives high yields of a homogenous mobile liquid for direct ... significantly increased R&D…
thickness kept at (80±5) nm in all cases by spray pyrolysis technique. The thermal behavior of the (MgO) is described in the results of X-ray diffraction
dioxide (SnO2) thin films have been deposited using chemical spray pyrolysis on non- conducting glass substrates at temperature 400oC with different solution concentration from 0.2M to 0.5M.The structural , optical
Undoped and aluminum-doped ZnO thin films are prepared by ultrasonic spray pyrolysis at 400 °C on glass substrates were investigated. In this preparation Zinc acetate dihydrate is used
particles of Mixed (PbO)1-x(CdO)x thin films were prepared by spray pyrolysis technique at a substrate temperature of 400oC. The films deposited were 160 nm thickness
this investigation, FeS2 thin films were synthesized by spray pyrolysis technique on glass substrates. The films were annealed at 400 ºC and 450ºC in air for a period
SnO2 thin films were synthesized by spray pyrolysis technique on glass substrates preheated to 500ºC. The films were annealed at 550ºC in air for periods
films were prepared on glass substrate using a simple and low-cost chemical spray pyrolysis technique at different substrate temperature. The MnO2 films were characterized by X-ray diffraction
Thin films of titanium dioxide TiO2 were prepared using thermal chemical spray pyrolysis technique on glass substrate preheated at (210 oC) with spray rate 3sec./1min, for different thickness
Cadmium Sulphide (CdS) thin films were prepared by Chemical Spray Pyrolysis technique. Cleaned glass substrates were used. The Substrate was maintained 3000c the films were Characterized by X-ray diffraction
Pyrolysis is the technique for the breakdown of high mol wt substances into smaller components, so that they can be separated and analysed by chromatographic techniques like Gas chromatography. This
Different methods of urban sewage sludge energy recovery such as burning, gasification, pyrolysis and digestion based on the net energy production efficiency, advantages and disadvantages and complexity of these…
This study presents the first comparative assessment of the pyrolysis products from anaerobically digested and undigested sewage sludge in a continuous auger reactor. The samples were extensively analyzed using various…
start (diesel) motors. Results for diesel substitutes demonstrate the unrivalled exhibition of plastic waste pyrolysis oil as far as creation cost decrease (−25% contrasted with diesel) and "well-to-tank ... outcomes…
Pyrolysis GCMS is one of the important methods to analyse any unknown polymer. Pyrolysis breaks the polymer to such a degree that sometimes it is difficult to figure ... alkyds, polyesters, acrylic polymers. Various…
Abstract:Biomass pyrolysis for high-valued products is an important development direction for biomass utilization. Biomass contains large amounts of O-containing groups. If using nitrogen to substitute oxygen…
morphological and electrical properties of graphene thin film by facile and eco-friendly spray pyrolysis route using liquid phase exfoliated graphene dispersion. Few layer graphene dispersion was prepared by liquid…