hours before testing. The flexural strength and the fracture toughness were evaluated using universal testing machine at a cross-head speed of 1 mm/min. Results: Data were analyzed using
attachment and another without the attachment using the tensile test in the universal testing machine to measure the maximum forces required to remove the aligner from the model. Results: Leone
different properties such as physical, mechanical, thermal properties were studied by Universal Testing Machine (UTM), Micro hardness tester, TGA/DTA analyser and X-Ray diffractometer etc. In this work
microtensile bond strength of each piece was measured and recorded using the Universal Testing Machine. Data analysis was done using SPSS 17 software and P-value less than
measured using pulling the wire through set of ceramic brackets by the universal testing machine. The data were then statistically analyzed using ANOVA tests. Results: Generally measured wire dimensions
mechanical strength of the Ã?²-TCPGC was measured as a DTS by universal testing machine. Ã?²-TCPGC was implanted in rabbit femur for 4 weeks and the percentage of newly
simulate stresses in the oral environment. Fracture strength was measured using a universal testing machine. Data were analyzed using one-way ANOVA and Tukey’s test (0.05). Fracture strength increased
other half were tested in dry conditions. By using the Instron universal testing machine, a 3-point bending test was achieved, each specimen were loaded and examined with
mechanical strength of the β-TCPGC was measured as a DTS by universal testing machine. β-TCPGC was implanted in rabbit femur for 4 weeks and the percentage of newly
modulus and elongation at break for amnion and chorion membranes were tested using universal testing machine. Suture retention and degradation tests were conducted. The tensile strength of amnion membrane
thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC). The mechanical properties were measured using universal testing machine (UTM). Degradation test was performed using PBS solution and…
pattern, the shear bond strength of the two components was measured using a universal testing machine, and the results were analyzed using t-test. In this experimental study, 40 samples
control group and left another day. De-bonding was performed using Instron universal testing machine. To determine the site of bond failure, both the enamel surface and bracket base
pellets quality the compressive strength analysis was conducted. Pellets were tested on the universal testing machine. It was found that the optimum strength was characterized pellets from Miscanthus and Jerusalem
untreated). Compression testing for the four groups was carried out using an electronic universal testing machine. The maximum resistance strength when the teeth cracked was recorded. Results: Differences
Fillapex, and Total Fill BC Sealer. A vertical load was applied using a universal testing machine. All statistical analyses were performed with the SPSS (ver. 20.0) software. The results were
properties of the FSs were assessed by scanning electron microscopy (SEM) and a universal testing machine (UTM). The changes in chemical composition due to the incorporation of collagen to PLGA
measurement was 50 mm. The specimen was subjected to direct tension using a universal testing machine (UTM). The speed of the machine displacement was 1.0 mm/min. The reduction
measurement was 50 mm. The specimen was subjected to direct tension using a universal testing machine (UTM). The speed of the machine displacement was 1.0 mm/min. The reduction
with adhesive resin cement. All specimens were subjected to compressive loading in a universal testing machine. The mean failure loads obtained from ceramic crowns with zirconia cores, monolithic zirconia crowns
guidelines of ISO 20795-1 for DBM. Mechanical testing was performed using a Universal Testing Machine. The results indicated that Glass fiber reinforcement resulted in significant enhancement in mechanical properties
hour, twenty four hours, one week, two weeks and three weeks by Electromechanical Universal Testing Machine. To compare the results, ANOVA, Tukey and T-test were (level of significance
times. The micro-shear bond strength of composite-dentin interface was evaluated using universal testing machine at a crosshead speed of 1 mm/min. Data were statistically analyzed using ANOVA
dual-cure resin cement (BisCem Bisco, Inc, USA). Specimens were mounted in a universal testing machine (Model 3345; Instron Industrial Products, Norwood, MA, USA). Each specimen was loaded to failure
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.