Nano nickel-iron alloy and nano copper particles were synthesized and characterized with x-ray diffraction and field emission scanning electron microscopy. Energy dispersive spectroscopy analysis carried out to identify
Spectroscopy (FTIR), Ultaviolet-Visible Spcetroscopy (UV-Vis), Small angle X-ray Scattering (SAXS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The surface area
scanning electron microscope-energy dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Raman spectroscopy. It was found that the 1 µm thick MnO2 film
analysis (TGA), whereas for the chemical composition FTIR, RAMAN, CD spectroscopy, and powder x-ray diffraction. Later, plasma-enhanced chemical vapor deposition (an eco-friendly and solvent-free method
synthesized. The quantum dots are characterized by using UV-Visible spectroscopy, Fluorescence Spectrophotometer, X-ray diffraction studies, Transmission Electron Microscope and Electron dispersive spectroscopy are…
were investigated using Scherrer formula and Whole Powder Pattern Modeling (WPPM) of the X-ray powder diffraction (XRPD) pattern. Due to the inhomogeneity of the microstructure of the starting powder
grain size, fracture surface and hardness were analyzed by scan electron microscopy and X-ray diffraction, Archimedes densitometry, Micro-hardness tester. The corresponding results indicated an increase in the…
phases formed in the developed sintered composites were detected by energy dispersive X-ray diffraction spectrometer (XRD)Micro-hardness was explored by the means of a high impact diamond Dura
torr. X-ray absorption spectroscopy indicate the clusters are Fe3O4, but on metallic Fe. In addition, muon spin relaxation and polarized neutron diffraction all indicate the Fe doped In2O3
sample preparations as well as the sample measurement. The high-resolution x-ray diffraction is a non-destructive, economic, quick and robust technique than electron microscopes and depending
such as x-ray induced photoelectron spectroscopy (XPS), high resolution transmission electron microscopy, x-ray diffraction and Raman spectroscopy. Evidences from XPS and Raman measurements reveal that the different…
TiO2 nanostructures were analyzed by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Raman spectra, and X-ray spectroscopy (XPS), respectively. XRD and Raman spectra results confirm
five is monophase alloy, consisting of sole Ti5Si3. Microstructure was examined by synchrotron X-rays diffraction and high resolution transmission electron microscopy. This alloy is almost 300% harder compared
Raman spectroscopy. The microstructure of the 3D printed scaffolds is further characterised by X-ray diffraction before and after sintering. Special highlight of the study is first testing with additional
chemical bath deposition (C.B.D) at (150˚C). Structure characterization was carried out using X-Ray Diffraction spectrum, in order to determine the average crystallite size which found in the range
experimental setup for radiobiological studies using low energy X-ray beams emitted by diffraction X-ray tube (C-tech tube, no. 9430 922 00291, PANalytical, Holland) created at Jan Kochanowski
site ordered n=1 Ruddresden-Popper (RP) phases NaRTiO4 (R: rare earth). Synchrotron X-ray diffraction and optical second harmonic generation studies in conjunction with density functional theory (DFT) have
were characterized by ultraviolet-visible (UV-Vis) and photoluminescence (PL) spectroscopic techniques, X-ray diffraction technique (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy…
hours. The features of these catalysts were characterized by the electric resistance measurement, X-ray diffraction, field emission scanning electron microscopy, field emission transmission electron microscopy âÂ?Â?…
method. The phase and morphology of LDH@ZIF-67 samples were examined with X-ray powder diffraction (XRD) and field emission scanning electron microscope (FE-SEM), respectively
range of methods such as Fourier transform infrared (FTIR) and NMR spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal analysis and dye adsorption in aqueous solution. The adsorption
catalysts were obtained their characterization was carried out by the methods of x-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Degradation tests are carried out on the wastewater
manufactured materials were characterized by optic microscopy (OM), scanning electron microscopy (SEM-EDS), X-ray diffraction (XRD) and X-ray computed tomography (XR-CT). The density was obtained by Archimedes
laser granulometry. Microstructure of the composites has been analysed by electron microscopy, X-ray diffraction and Raman spectroscopy to assess the integrity of the GNPs, their degree of dispersion
seed shell ashes were evaluated by different techniques such as X-ray fluorescene, X-ray diffraction and thermogravimetric analysis. The analysis was done in order to determine its suitability ... economic means for…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.