presented in this paper examines the effect of low and high Al content on microstructure and mechanical properties of hot rolled steel. The influence of control rolling has also been
place at the nano-scale and is governed by the elemental compositions and nano-microstructure of the steel as well as the chemistry of the concrete and the environment around
Microstructural changes in grain boundary carbide precipitates have been correlated with stress during creep of solid solution strengthened by nickel based superalloy, alloy 617, at 950°C. The observed redistribution…
their subsequent uptake by cells at the intestinal epithelium. In addition to food microstructure, food processing is also important for carotenoid bioavailabilty. Heat treatment, acidification and exposure to light
Mini- Mental State Examination scores (p<0.001). The superficial white matter has a unique microstructure and is critical for the integration of multimodal information and during brain maturation and aging
copper HAZ. Metallography revealed ferrite (α) and copper (ε) cellular and dendritic shaped microstructure in the weld metal. Post weld heat treatment (PWHT) was attempted to observe if any improvements
This investigation is undertaken to develop a model to predict the microstructure and mechanical properties of Friction Stir Welded (FSW) thick pure copper plates using Artificial Neural Networks
predict outcomes. Therefore, this paper is undertaken to develop a model to predict the microstructure and mechanical properties of FSW. The proposed model is based on Ring Probabilistic logic Neural
were studied via determination of the percentage of ash and moisture contents, surface area, microstructure using scanning electron microscope (SEM) and function groups present via FTIR. Stepwise remediation method
other vinyl monomers, like methacrylates. Especially among electronics, coatings, lithography, dental applications and 3D microstructures highly specified resins with low volume shrinkage are fundamental to match the…
composite was determined by Arrhenius analysis and found to be significantly low. Microstructural analysis of the composite by SEM, FESEM and TEM clearly shows the random orientations of the bundles
dielectric properties and microstructure of co-doped B-site and A-site BaTiO3 solid solution of the type (Ba, M) (Ti, M’) O3 were investigated. The influence of extremely small ... amount of Sr, Sn, Zr and Ca dopants on…
impact, the molten metal droplets are rapidly flattened and solidify to form their splats. Microstructure and physical properties of sprayed coatings are linked to dynamic properties of molten particles impinging
structural evolution at high deformation. The deformation mechanisms and cementite stability was analyzed. The microstructural study was carried out applying light and Scanning Electron Microscopy (SEM). Finally, the…
nanoscale that combine composition and crystal structure control and optimization of the microstructure to manipulate the intrinsic magnetic properties of magnets (magnetization, exchange and magnetocrystalline…
other vinyl monomers, like methacrylates. Especially among electronics, coatings, lithography, dental applications and 3D microstructures highly specified resins with low volume shrinkage are fundamental to match the…
compliance. The second approach to improve TBC system performance is to optimize the surface microstructure, surface densification, phase structures mechanical characteristic, chemical structure, and thermo-physical…
powder over the polyamide surface. SEM with EDX was used to characterize the microstructure and the chemical composition of the deposited layer. The crystallinity of layer was confirmed using
fabrication technologies for a variety of bone tissue engineering scaffolds discussing their microstructure and pertinent properties. The spotlight is in the development of synthetic scaffolds based on bioactive glasses
drying the suspensions of INS-CS NPs with the sugar mannitol (thermoprotectant), resulting in microstructured powders with adequate aerodynamic properties for lung deposition. In vivo performance
micro-CT, to measure mechanical parameters of regenerated dentin and to assess the microstructure of the regenerated dentin by scanning electronic microscope (SEM). We regenerated dentin and dental pulp
using electrochemical technique and investigated for its corrosion behavior. The morphologies and microstructures of the developed coatings and uncoated samples were characterized by Optic Nikon Optical microscope (OPM)…
adding Al and Ti powders to SiC laser deposited on Ti-6Al-4V. Microstructural characterization and phase analysis were carried out using SEM/EDS and XRD. Surface hardness was measured
energy electropulse is frequently used as an electrically-treated method in improving the material microstructure and mechanical property. The current investigation reports firstly the surface modification under EPT…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.