sorbents were done using different analytical tool such as X-ray fluorescence and x-ray diffraction spectrometers. Factors affecting on the retention process of the studied toxic cations such
were characterized by Fourier Transform Infrared Spectrometry (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD. (The effect of different parameters including pH, fluoride concentration, contact time…
from wheat straw samples are illustrating with Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) methods. FTIR is the good techniques for studying changes by chemicals treatment. FTIR
polyimide/Ag nanofiber membranes were characterized by using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), UV-Vis, FT-IR and thermo gravimetric analysis
thermal properties of Si- and Fe-substituted Ã?²-TCP were investigated by using X-ray diffraction combined with Rietveld refinement analysis and differential thermal analysis (DSC) to compare the effects
film thicknesses of CH3NH3PbI3âÂ?Â?xClx layers. We investigate the device performance of X-ray diffraction (XRD) patterns, atomic force microscopy (AFM) and scanning electron microscopy (SEM) images of CH3NH3PbI3âÂ
effect of doping on structural, optical and stress properties have been investigated. X-ray diffraction analysis showed that all the films are polycrystalline with hexagonal wurtzite structure
prepared by this method were evaluated for crystallinity, optical transmittance, and thickness by X-ray diffraction (XRD), recording spectrophotometer, and stylus surface profiler. Figure1 shows (a) XRD patterns
Fe2O3- MoS2 nanomaterial was characterized using combination of physical techniques such as SEM, X-ray diffraction, UV-vis, FTIR and Raman techniques, respectively. The photocurrent, electrode/electrolyte interface…
synthesized using a solid reaction. The structural and optical properties were analyzed by X-ray diffraction and ultraviolet-visible absorption spectroscopy. As a result, the optimal iron to cobalt doping
agglomerate. The structural investigation of Au-PANI composite films were performed by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and micro- Raman spectroscopic techniques. The qualitative analysis
strength and osteoconductivity to the agarose hydrogel. Fabricated scaffolds have been characterized via X-ray diffraction, FTIR spectroscopy and electron microscopy (SEM). Furthermore, porosity, drying and swelling…
information on their chemical composition, 3D bulk and surface structure. Thus, FTIR spectroscopy, X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM) and zeta potential
identified by in-situ conductivity measurements as a function of p(O2), x-ray diffraction analysis and x-ray photoelectron spectroscopy. In particular, the in-situ conductivity measurements confirm that
Characterization: Structure of the as-prepared powder can be identified by the powder X-ray diffraction (XRD) technique and the particle size using transmission electron microscopy. The powder
elements present in each of the formed layers were determined. In addition, X-ray diffraction (DRX) and X-ray photoelectron spectroscopy (XPS) techniques were analyzed on this material to identify
operating conditions inside the devices. We present results from in operando high-energy X-ray diffraction (HE-XRD) study coupled by atomic pair distribution function (PDF) analysis and energy dispersive
then decreases to ~60 cm2/V-s while the annealing T approaches 300oC. X-ray diffraction (XRD) analysis was performed on the IAZO samples in order to investigate amorphous/crystalline
electrical behavior was observed under twisting. Their physical properties were also characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and…
excitation of 254 nm source. The structural/microstructural analysis was characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis and photoluminescence behaviour characterized…
xBixCoRuO6 (0.0âÂ?¤xâÂ?¤0.8) materials by conventional solid-state reaction method. X-ray diffraction (XRD) analysis confirmed the phase purity of all the samples. Lattice parameters and unit cell
exfoliation was satisfied. Also, using molybdenum telluride as a test case, we performed X-ray diffraction and Raman scattering experiments to benchmark our calculations and understand their applicability and limitations
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.