pyridyl)tetrazole] was prepared by hydrothermal reaction and structurally characterized. Single crystal X-ray diffraction analysis revealed that the Co(III) is six-coordinate by six nitrogen atoms of three
Thin film were heat treated between 450-750oC and characterized by thermal analysis, X-ray diffraction, scanning electron microscope and FT-IR spectroscopy. A low temperature synthesis was possible
tide to substitute higher than 0.2mole on Mg-sites. X-ray diffraction analysis for investigated samples proved that all samples were found mainly belong to single hexagonal phase with
X were investigated. The crystalline product was characterized by scanning electron microscopy, X-ray diffraction and chemical analysis. In this work, attempts were made to synthesis high aluminum zeolite X
samples are selected for this study. The samples are tested by chemical analysis (CA), X-ray diffraction (XRD), differential thermal analysis (DTA), infrared spectroscopy (IR), cation exchange capacities
effect of the grinding period were studied. X-ray diffraction (XRD), X-ray fluorescence (XRF) and size analysis were done for the sample before grinding. Complete physico-chemical characterizations
X-ray Photoelectron Spectroscopy or Raman Spectroscopy has been used for crystallinity analysis wide angle X-ray diffraction has been used and for other solution measurements UV-Vis spectrophotometer
infra-red (FT-IR), X-ray diffraction (XRD), high-resolution transmission microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) and the specific surface ... area was…
microstructure of the sintered pellets were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD analysis confirmed the formation of the tetragonal structure with
nanocomposite films was carried out by infrared spectroscopy with Fourier Transform, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy; and the preservation capacity of foods coated with
confirmed the formation of QDs having average size of 4 nm. The X-ray diffraction pattern exhibits cubic crystal structure of CdSe with reflection ... thermal stability as compared to the pure CuPc indicated by…
film thickness due to lesser porous observed on the surface. Phase analysis was carried out using X-ray diffraction (XRD). The results confirmed the tenorite and hematite phase
have been characterized by studying the structural, morphological, optical and antimicrobial properties. The X-ray diffraction (XRD) pattern was used to analyze the phase and crystal structure of the nanoparticles…
confirmed by Scanning Electron Microscopy fitted with element analysis accessory (SEM/EDX) and X-ray Diffraction Technique (XRD). In case of FLNR preparation, deproteinized natural rubber (DPNR) latex was used
hydrothermally prepared metal nanoparticles. The as prepared bionanocomposites were characterized by XRD (X-ray Diffraction analysis), Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet-Visible (UV-Vis)…
synthesized materials were characterized by ICP-AES, Energy dispersive X-ray analysis, Scanning electron microscopy, X-ray diffraction, BET surface area, Fourier transform infrared spectroscopy, Thermo-gravimetric…
incipient wetness impregnation method. Several techniques were used in characterization of the catalysts: X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N2 adsorption-desorption and…
precipitation method. The nanostructures were characterised using transmission electron microscopy, X-ray diffraction, fourier transform infrared spectrophotometry and thermogravimetric analysis to reveal the…
precipitation and ion exchange and all samples were characterized by powder x-ray diffraction, infrared spectroscopy and zetasizer analysis. The amount of drug loaded and released was determined
prepared phosphors were characterized by X-ray Diffraction (XRD) technique for confirmation of the formation of the desired product, crystallinity and product phase purity. The XRD patterns confirmed crystallization…
electron microscopy with energy dispersive X-ray spectroscopy (SEM- EDX) and X-ray diffraction (XRD) methods for surface analysis and phase identification of the crystalline material. These analyses revealed variation
using different techniques such as transmission electron microscopy (TEM), BET surface area analysis, X-ray diffraction analysis (XRD), and FTIR spectroscopy. In addition, X-ray photoelectron spectroscopy (XPS) was also
transition from dentine to enamel are correlated with the study of internal architecture using X-ray scattering (SAXS/WAXS). We illustrate how this provides improved insight into the origins ... Hierarchical modeling of…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.