FGMs solution than the solution of single layer. The microstructure of surface coating and thickness of layers were characterized by optical microscopy and SEM that showed homogeneity and crack free
water to synthesize one-part geopolymer pastes, and the strength and the microstructures of relevant specimens were characterized. An acceptable compressive strength was obtained when the hydrated specimens were cured
performed with a rotor-stator device at a speed of ~5000rpm. Microstructure and particle distribution was characterized using optical and electron microscopy assisted with EDAX and EBSD techniques. Mechanical performance
alloyed and SPS alloy and composite were characterized by optical microscopy, Field Emission Scanning Electron Microscopy (FESEM) and X-ray Diffraction. Microstructural investigations of consolidated specimens were…
variety of tests were performed to assess the quality of the coating obtained: The microstructure characteristics of powder and coating were investigated using Scanning Electron microscopy (SEM) coupled with Energy…
tested for different physico-chemical, mechanical and biological properties. Physico-chemical characterization include chemical analysis, XRD, XRF, FTIR, microstructure by SEM, detailed porosity, pore size distribution…
melting ranges and the carbides’ characteristics were experimentally characterized, and compared to the results of thermodynamic calculations. The microstructures are hypo-eutectic (2.5wt.%C), eutectic (3%C) and hyper
studied soils under oscillatory stress. The gradual depletion of microstructural stiffness during AST can be characterized by the well-known rheological parameters G′, G″ and tan δ but also
presence of argon ambient for 5 shots. Samples were characterized by various characterization techniques to study structural, microstructural, morphological, compositional, chemical properties and concentration gradient…
also carried out and demonstrated good room temperature hydrogen sensitive characteristics. Microstructure of the sensor was characterized by Scanning Electron Microscope (SEM) and it showed that the Pd nanoclusters were
obtain a plastic mass for the preparation of hemosorbent with a microstructure. The carbon monolith is characterized by a large number of mesopores compared to similar sorbents "dust" which does
bulk and nano-scale, (ii) influence of pyrolysis conditions on the microstructure of resulting carbon, (iii) characterization and classification of carbon obtained from polymers of different chemical classes
were prepared by lyophilization and cross-linked by UV irradiation. Synthesis and microstructures of the biocomposites were characterized using UV-Vis spectroscopy, FTIR, FE-SEM equipped with
each deposition temperature were 15, 100, and 250 nm thick. We characterized the crystalline states and microstructures of the thin films by X-ray diffraction (XRD) and high-resolution transmission
alloy containing 30 wt.%of chromiumand other alloying elements was characterized. In this first part of the work, the microstructure of the alloy in its as-cast state ... microstructure of the alloy nor its hardness. In…
stage disease marker. This work is to discuss recent advances in microstructural, metabolic and vascular MRI to better characterize early changes of hippocampus due to aging and dementia. These advanced ... with…
systemic changes that is of worldwide public health concern, characterized by a decreased bone mass and a deterioration of bone microstructure. Several drugs has been used to osteoporosis treatment with
liquid precursor featured adjustable viscosity and long shell life. FT-IR was measured to characterize the molecular structure of LZO to verify the coordination of acetylacetone ... obtained with an average crystal size…
irradiation process and a polymer removing process. The prepared microstructured PEG hydrogels and microporous PEG structures were characterized by a geometric investigation and an absorption test with PBS buffer…
Methacrylate (PMMA) based composites were prepared via solution casting techniques. The microstructure and structure of the resultant compositeswere characterized by SEM (Scanning Electron Microscopy) and XRD (X-ray…
were additionally compressed until reaching 800 to 1000 GPa. Their microstructure, volume mass, plastic deformation amount and hardness were characterized and compared to analyse the effects of thermal treatment
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.