samples are layers of CdSe obtained by vacuum evaporation on glass substrates, ZnO and SnO2 oxide layers. These last were grown by oxidation of Zn and Sn layers at respective ... high temperatures around 200°C, while…
mill wastewater OMW using different anode materials: iron, stainless steel, boron doped diamond and SnO2 is investigated. Total discoloration of OMW solution is obtained by electro-coagulation using both iron…
ranged from 0.1-0.5 wt.% of non-magnetic nano metal oxides, namely CuO and SnO2. The most important feature of this study is the ultrahigh values of dielectric constant ... doped YBCO samples is recorded for 0.2 wt.%…
Carl Zeiss SEM equipped with nanomanipulators. Next are the attempts for on-chip growth SnO2 nanowires on Au patterned alumina substrates and lastly the Au/Ti contacts to individual SnO2
layers were investigated. The EDX analysis reveals that the ITO films preserve the In2O3:SnO2 weight ratio of the ITO target (In2O3:SnO2=90%:10% weight). The morphological investigation proves
cost and reliable power generation almost any electrical device. Hydroelectric Cell based on ferrite/SnO2/TiO2 can be used in a wide range of portable, stationary and transport applications, from
cost and reliable power generation almost any electrical device. Hydroelectric Cell based on ferrite/SnO2/TiO2 can be used in a wide range of portable, stationary and transport applications, from
TiO2/SO3H-graphene, polyaniline-graphene/TiO2, etc.) and other semiconductors (V-doped BiMoO4, Pd/SnO2/ graphene, etcIt demonstrates that such a photoelectrochemical technology is a good fit for water quality
doped SnO2 thin films of various compositions were deposited on the surface of a corning substrate by dropping the two sols containing the precursors for composite (ZSO) with subsequent heat
start investigations start with concentration 1 ppm acetone. The response of the MWCNT-doped SnO2 chemiresistors was measured at a concentration of acetone from 1 to 12 ppm, characteristic
Fe2O3 films were grown on α-Al2O3 (110) substrates with a Ta-doped SnO2 electrode layer by pulsed laser deposition. The optical absorption spectra of the films indicate narrowing
NaCl. The result showed that the electrocodeposits displayed good stability and Zn-TiO2-SnO2 nanocomposite deposits exhibited enhanced microstructural qualities, good electrical conductivity and exhibited enriched…
reducing gas, detection by sensors such as ZnO [7], In2O3 [8], and SnO2 [9] has been previously studied but among SMO materials WO3 has been proposed as the most suitable
Chung-Kai Peng, Cho-Wei Li, (2019), “Wettability and optical properties of SnO–SnO2–Sb2O3 thin films deposited by simultaneous RF and DC magnetron sputtering”, Journal of Alloys and Compounds
chemo-mechanically and ultrasonically cleaned stainless steel (ss) and fluorine doped tin oxide (F:SnO2 or FTO) coated conducting glass substrates. The variation of growth rate with temperature has been
Ammari A, Madoune Y and Lambert SD (2018) Structural and optoelectronic properties of SnO2 thin films doped by group-1A elements. Surface Review and Letters
manufacturing issues. Particularly, deposition of the typical semi-conductors such as a metal oxide (SnO2, TiO2, NiOx, ZrO2 and ZnO), organic/ inorganic perovskite and conjugated and doped donoracceptor polymers
measure of the blood glucose levels of a person. A TGS822 tin oxide (SnO2) sensor has been used to detect the concentration of acetone in the exhaled air. Acetone
Ammari A, Madoune Y and Lambert SD (2018) Structural and optoelectronic properties of SnO2 thin films doped by group-1A elements. Surface Review and Letters
Wang, S. Lin*, One-pot synthesis of Pt/SnO2/GNs and its electro-photo-synergistic catalysis for methanol oxidation, International Journal of Hydrogen Energy
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.