studied. Coil position, rotation and quench conditions were handled according the geometry, hardness and microstructural requirement of the shaft. Hardness at 7 different locations along with the total case depth
Adetailed comparison of the properties and microstructures of conventionally sintered and microwave sintered samples of 3 mol% and 8 mol % yttria zirconia was performed. Identical thermal profiles were used
From the SEM photographs, the thin films were found to be possessing fine grained microstructure on the glass and, grains were large in size at 0.06 mb partial pressure
Iwill present the effect of wiredrawing on the mechanical and microstructural properties of industrial copper and aluminum wires. The regular orientation of the grains (texture) caused by external stresses during
components is very important. Present work deals with the investigations of microstructure, electrophysical characteristics, microhardness, internal friction and shear modulus of Si 1-x Ge x (x≤0,02) bulk
liberation size of Ilesha - Itagunmodi gold ore. It also carried out the chemical and microstructural characterization of the ore, and derived a froth flotation process route to upgrade
alloy steels (HSLA) known as dual phase steels (DP steels) have a distinctive microstructure which consist of a ferrite matrix with particles of martensite. Commonly, low carbon steels with
investigations on the effect of silver ion substitution by cations of different size on microstructure and ionic conductivity of the compound CsAg 2 I 3 . This attempt is to find
Reinforcement process is carried out by stir casting method Microstructure and mechanical properties of Nano composites. The nanocomposites were characterized by scanning electron microscope (SEM) and X-ray diffraction
In2S3 phase. According to SEM image, the film is very compact and homogeneus microstructure. Electrical measurements by Hall effect shows that resistivity is about 0.910-3Ω.cm, tIn2S3 ... In2S3 phase. According to SEM…
from toluene medium used during milling. MA powder that was obtained exhibited fine grained microstructure with nano sized grains available in the range of 10-20 nm having polyhedral shapes
were tested at room temperature for uniaxial compression and sample sections were characterized for microstructure properties using optical microscope and SEM (Scanning Electron Microscope).The effect of addition of…
Structural, microstructural and magnetic properties of polycrystalline Ni50Mn29Ga21 alloy are studied. Processing parameters are optimized to get large grain size and multimode twinning in polycrystalline alloy. The…
dementia (PDD)). PDD and AD dementias are different in pathology although the difference in microstructural changes remains unknown. To further understand these diseases, it is essential to understand the distinct…
development was made based on study of chromium influence on the phase constituents, microstructure, mechanical properties, corrosion resistance and electrochemical characteristics of Ti- 8Ni alloy. Optimum condition of…
Reinforcement process is carried out by stir casting method Microstructure and mechanical properties of Nano composites. The nanocomposites were characterized by scanning electron microscope (SEM) and X-ray diffraction
depth the same. The characterization of samples was done in respect of chemical composition, microstructure & micro-hardness. The rotating bending fatigue tests on plasma nitrided samples were conducted at various
porosity and solidification shrinkage. The aim of the present work is to evaluate the microstructure and mechanical properties of friction stir welded AA6061 cast and wrought aluminium alloy joint ... were characterized…
scanning electron microscopy/energy dispersive X-ray spectroscopy were used to investigate the crystallinity, microstructure and morphology and of the coatings. Electrochemical potentiodynamic test were performed to…
Photoresists for Microlithography?? What could be the relation between 2D- NMR studies and the microstructure of polymers as well as the mechanism of action of such materials- the real workhorses
wear failures. Objective of this study is to understand, the role of nanoparticles, nano-microstructure, strength of particle-matrix interface and effects of geometrical gradient and mechanical gradient on energy
Polyaniline?iron oxide magnetic nanohybrid was synthesized and characterized with spectroscopic, microstructural and electrochemical techniques. The smart integration of Fe3O4 nanoparticles with polyaniline (PANI)…
different frequencies of 5Hz,&10Hz on 3mm thick sheets. Hardness test, tensile test and microstructure results of weldments were studied . The aim of this experimental work
gravity casting using permanent moulds. They were heat treated (T6) and tested for microstructure, mechanical properties. The Pin-on-Disc apparatus was used to study Wear behaviour at a constant ... sliding velocity of…
were reinforced with varied percentage of Graphite by liquid metallurgy route and tested for microstructure, mechanical properties and wear behaviour. The wear tests were conducted using Pin-on-Disc apparatus…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.