before and after ZnO NPs deposition were estimated by inductively coupled plasma atomic emission spectroscopy and ultrahigh-resolution scanning electron microscopy (UHR-SEM). Alambeta and moisture management tester were…
high resolution transmission (HR-TEM) microscopies, energy dispersion (EDS) and Raman spectroscopies were performed. The results showed that the vast majority of the recorded nanoparticles have an aerodynamic diameter
sprayed at 1.3 bars pressure. Composition of coatings was confirmed using Fourier-transform infrared spectroscopy (FTIR). Electrochemical characterization of the coated samples was done using potentiodynamic…
surface area of 860 cm2 (2, 6, 12, 18, and 24 hours). Atomic absorption spectroscopy was used to measure the amount of copper leached. Luria Bertani broth was prepared using
Balderas-López. Measurement of the Optical Properties of Gold Colloids by Photoacoustic Spectroscopy, 2018, International Journal of Thermophysics, 39:93 Balderas-López JA, Jaime-Fonseca RM, Gálvez-Coyt G, Muñoz
starting material. The NCC was characterized by SEM microscopy, X-ray diffraction and NMR spectroscopy. The average particle size was between 200 nm and 500 nm, with diameter from
samples has been accessible using non-ionizing “light-based” technologies including optical imaging and spectroscopy. Based on the lighttissue interaction optical technologies can provides structural and functional…
benzene, as well as the experimental results of the hydrogenation heat and ultraviolet spectroscopy of benzene. Semivalent bonds are represented by dashed lines, molecular structures and chemical reaction formulas
used to investigate the morphology of nanoscale biopolymers. Fourier transform infra-red spectroscopy (FTIR) and x ray diffraction (XRD) are being used to study the f unctional group changes, crystallographic
acid as molecules with specific receptors expressed on some cells' surfaces. Fourier transform infrared spectroscopy (FTIR) and Transmission Electron Microscopy (TEM) confirmed successful chemical surface modification…
given organism or biological sample. The enhanced resolution provided by nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS), along with powerful chemometric software, allows the simultaneous…
used to investigate the morphology of nanoscale biopolymers. Fourier transform infra-red spectroscopy (FTIR) and x ray diffraction (XRD) are being used to study the functional group changes, crystallographic texture
from shells of water snail. The extracted chitosan was subjected to Fourier transform infrared spectroscopy (FTIR) analysis. The FTIR spectrum of the extracted chitosan showed characteristic absorption peaks within
techniques used to study the corona virus such as size exclusion chromatography, circular dichroic spectroscopy, and Multiage Light Scattering and micro array methods
widely characterized by using sophisticated analytical techniques such as near-edge X-ray adsorption spectroscopy (NEXAS), 13C solidstate NMR, HR-XPS, HR-TEM, SAED, XRD, SEM, AFM, Raman
used to investigate the morphology of nanoscale biopolymers. Fourier transform infra-red spectroscopy (FTIR) and x ray diffraction (XRD) are being used to study the functional group changes, crystallographic texture
well in Ras Qattara area north western desert, Egypt were estimated using gamma-ray spectroscopy system using a closed end-coaxial Canberra N-type HPGe detector of vertical configuration, with
tooling. Further, for analyses of deformation and orientation on CR4 steel, X-ray diffraction spectroscopy was performed. The samples were cut by wire electric discharge machining (WEDM) and polished
analysis, and surface morphology were investigated by X-ray diffraction, Energy-dispersive X-ray spectroscopy, Raman spectroscopy, and scanning electron microscope. The film stoichiometry was found to match the target
pattern. The solvent effect on copper phtalocyanine dispersion’s was studied by UV visible spectroscopy and the minimum sheet resistance of printed circuit board was reached at about
Using calibration-free laser-induced breakdown spectroscopy, this study proposes a unique approach for determining phosphorus (P) content in phosphogypsum (PG) waste samples (CF-LIBS). The PG-LIBS spectrum
techniques like X-ray diffraction (XRD), Scanning electron microscope (SEM),FTIR and Raman shift spectroscopy were used to investigate the morphology and structure of synthesized nanoparticles, while thermal conductivity
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.