from energy dispersive X-ray diffraction spectra. The embedded TiO2 nanoparticles changed the compactness, microstructure and preferred orientation of the deposit when compare to pure zinc coating
increase the mechanical strength. Hardness and toughness both can be increased by adding Al2O3. Microstructure is also checked to know the location of the additive particles in the aluminium alloy
agent. These poly(esteramides) were characterized by qualitative solubility data and viscosity values. The microstructure of the repeating units existing in the poly(ester-amide) backbone was established
were reinforced with varied percentage of Alumina by liquid metallurgy route and tested for microstructure, mechanical properties and wear behaviour. The wear tests were conducted using Pin-on-Disc apparatus…
liquid metallurgy route using permanent moulds. They were Heat treated (T6) and tested for microstructure, mechanical properties and wear behaviour. The wear tests were conducted using Pin-on-Disc apparatus ... constant…
porcelain were studied and analyzed in vitro. Exposure to gamma radiation doses caused a microstructure change which affects on all measured mechanical properties of dental porcelain. The hardness, breaking load
Samples were prepared for various compositions and the samples were investigated for microstructure, using optical microscope and SEM Apparatus and also tested for strength
adhesive characteristics of the HAp/TCP sheet on the enamel were evaluated mechanically and microstructurally in the present study. The adhesive strength (5.7 MPa) between the HAp/TCP sheet
work examines the roles of the composition of the collagen-based scaffolds on the microstructures, mechanical properties, and bioactivities. Scaffolds (with up to 80% elastin or 50% chondroitin-4-sulfate
rather than introducing all at once, there by trying to improve wettability and distribution. Microstructural characterization was carried out for the above prepared composites by taking specimens from central portion…
70wt%Zr) in as-cast as well as in heat treated conditions. Microstructural and dilatometric studies were carried out along with X-ray Diffraction Analysis (XRD) to evaluate the phase
were applied at four different temperatures of 550, 750, 950 and 1100°C. The microstructure of samples has been studied using the optical microscopy and the mechanical properties have been
recrystallization and grain growth. The annealed structures are characterized by optical microscope equipped with microstructure analysis software. The quantitative microstructure details like average grain size and…
main orientationswith respect to the deformation direction. In this first part only the microstructures and hardness levels are of interest. It is found that hardness increases more or less
permanent geometric change. The resulting much higher dislocations densities may lead to severe microstructure disorder inducing possibly changes in the surface reactivity of the piece, after or not machining…
investigated and could be tuned by varying the B’2O3 content. The structure and microstructure of the ceramics have been characterized byX-ray diffraction and SEMtechniques. The dielectric properties
foundry way then tested in oxidation at high temperature. The obtained types of microstructures were hypo-eutectic, eutectic or hyper-eutectic, this depending on the carbon content. The alloys were ... oxidized surfaces…
temperature was done and finished by a water-quenching allowing characterizing its high temperature microstructure. Second thermodynamic calculations were performed for comparison with the experiments. Qualitatively the…
were elaborated by induction foundry under inert atmosphere, then characterized in the microstructure field and in hardness. The obtained microstructures effectively show dendritic matrixes and interdendritic HfC…
containing hard phases and compound (pro-eutectoid cementite and pearlite) while the bulk’s microstructure has become the initial one (ferritic or ferriticpearlitic) since not reached by the added carbon ... letting…
early fixation and long-term mechanical stability of the prosthesis. In the present work microstructure, surface roughness and hardness of titaniumbiomaterialwere investigated before and after exposure to magnetic…
this second part of a work dealing with the microstructure effect of hafnium in chromium-rich refractory alloys in presence of carbon, cobalt alloys were considered. Several weight percents
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.