from 2.5 to 5.0 wt.%C, were cast and heat treated during 50h for microstructure stabilization at 1000, 1100 and 1200°C. The melting ranges and the carbides’ characteristics were ... experimentally characterized, and…
wide frequency range (1-12 GHz). Some additional investigations on the morphology and microstructure of the graphene particles, carbon nanotubes and furnace carbon black used have been carried
years ultrasonic measurements are found to be unique and nondestructive methods of determining the microstructures. Ultrasonic velocity, density and viscosity measurement have been carried out for 0.1 molar aqueous…
glasses, have a variety of established uses dependent on their uniform reproducible fine grain microstructures, absence of porosity, good packing density and high-strength, is synthesized, structurally and electrically…
reinforcement in polymer composites production requires the understanding of their chemical composition, microstructure and thermal behavior. In this work an attempt was made to investigate the morphology of Okhuen wood
configuration was used in the creep tests due to its suitability for deformation analysis. Microstructure changes of the alloy under these processes were examined and analyzed in terms of size
increased the thickness of ITOfilmsmore than three times by increasing the grain size. The microstructure of the ITO film changed from amorphous to polycrystalline as a function of increasing substrate
been used. Cold cracking susceptibility of high strength steel is primarily related to the microstructure of the HAZ which, in turn, is related to the preheating temperature. A lower preheating ... level, which resulted…
minimum microsegregation and high quality cast parts. This research is aimed to study the microstructure characterization andmicro-segregation of semi-solid processing gray cast iron. Increasing fraction of solid
type of alloy.After examination of the changes involved by the thermal cycles on the microstructures of the alloys, it appears that the accumulation of stresses in thematrix
alloys: not really chromiaforming behaviour, faster oxidation, even catastrophic in some cases. The bulk microstructures were either not changed by the high temperature exposures, or onlymoderately
aimof our research was to investigate the effect of high energy gamma radiation on microstructure, surface hardness and surface roughness of dental porcelain. Matrix microstructure of dental porcelain changed after
technique and sintering procedure using the appropriate amounts of nitrate solutions precursors.The structural, microstructural and electrochemical features of pure spinel and Se-(IV)- doped samples were…
A1350 alloy” was carried out and subsequent analysis made. The results obtained from the microstructure analyses carried out on the A1350 alloy cast samples show that structural changes occurred ... impact strength…
homogenous dispersion of the nano plaques within the polymer matrix which forms the exfoliated microstructure. In this way, organophilic silicates (OMMT) were obtained. Modification of the silicate expands the silicate
120M for manufacturing line pipes for transportation of petroleum products. A pan cake type microstructure design has been used to ensure the strength level of X-120M and ductile fracture ... processing) in combination…
muscle diffusion-tensor imaging, including needs to develop an improved understanding for the microstructural basis for reduced and anisotropic diffusion, establish the best practices for data acquisition and analysis
Transmission electron microscope (TEM), powder X-ray diffraction (XRD) were used to characterize the microstructure and morphology of the products obtained at various temperatures. The results of the photocatalytic…
diffraction (XRD) and Brunauer–Emmett–Teller (BET) were used to characterize the microstructure and morphology of the products.The results showed that the overall photocatalytic activity of TiO2/Ag2S nanocomposite
high resolution (10–20 μm) of OCT has the ability to provide detailed microstructural information about coronary plaques in vivo, as well as the histological examination. Various in vitro
mathematical equations. The use of pattern-fitting techniques for the characterization of the microstructure is discussed through applications to nanocrystalline materials. We used direct space that need no powder…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.