average porosity showed a pore size distribution between 75-100 μm and exhibited a compressive strength of 3.45 MPa, which is within the range of that exhibited by cancellous bone ... showed the highest average…
average porosity showed a pore size distribution between 75-100 μm and exhibited a compressive strength of 3.45 MPa, which is within the range of that exhibited by cancellous bone ... showed the highest average…
inhibitor on normal consistency of cement, initial and final setting time of cement, compressive strength of cement, soundness of cement and compressive strength of concrete were also analyzed. The results ... retarder…
straw-based polyol and 85% petroleum-based polyol and their thermal conductivity, density and compressive strength were determined. Findings: PU foams with no biopolyol replacement has superior thermal and mechanical…
straw-based polyol and 85% petroleum-based polyol and their thermal conductivity, density and compressive strength were determined. Findings: PU foams with no biopolyol replacement have superior thermal and mechanical…
having optimumcement, solid waste combination after 1, 7, 15 days curing are also shown. Compressive strength measurements could be used to determine the performance of the S/S process ... this sludge. Compressive…
concrete at elevated temperature on the basis of physical appearance, weight loss and residual compressive strength test. The geopolymer concrete cubes of 150×150×150 mm were cast. Three cubes ... were tested for…
applications in concrete reinforcement. Methodology: We report a novel method of increasing the overall compressive strength of concrete with the addition of defect-free, water-stabilised graphene dispersions. We…
applications in concrete reinforcement. Methodology: We report a novel method of increasing the overall compressive strength of concrete with the addition of defect-free, water-stabilised graphene dispersions. We…
present study, effect of gneiss powder as fine aggregate replacement on the compressive strength of concrete was investigated. The percentage of gniess powder added by weight ... replacement of river sand used in normal…
optimum solid to liquid ratio with the corresponding sonication time, slump and the compressive strength of concrete were examined and compared to the control mix (without nano silica addition) were ... silica. In…
particles were added mechanically to the compomers.The specimens were prepared for measurement of compressive strength, flexural strength and fracture toughness. The specimens were assigned to 9 experimental groups…
reinforced concrete has shown that the inclusion of some fibres in concrete enhance its compressive strength, some decrease, some improve the flexural properties. A study of the effect of basalt ... chopped BF) with the…
utilized, with or without 25% slag as cement replacement. Mixes were tested for workability, compressive strength and freeze and thaw resistance, which is considered a good indication for concrete durability ... hours…
selected for this study. The Normal consistency, setting time, soundness of cement paste, slump, compressive strength and density of concrete tests are done with ... cement replacement with cattle bone ash. The…
production of rubber cement composite paver block. The physical properties of RCCRP compressive strength, flexural strength, abrasion strength density, and water absorption testing by the IS 15658:2006 method. This…
orthopaedic bone cement. Results have shown a reduced peak polymerisation termperature and significantly improved compressive strength compared with bone cement with and without antibiotic incorporation. Background…
respectively. The ash content, volatile matter, fixed carbon, moisture content, compressive strength, ignition time, calorific value, water boiling test and burning time were carried out to determine the physical…
sands were curried for 30 minutes at atmospheric conditions and the development of early compressive strength studied in an attempt to understand the use and effect of these sands ... Ughelli sands can be used for HT HP…
CFST) columns has been investigated using experimental and analytical studies. The effect of concrete compressive strength, thickness of steel tube, stiffeners and longitudinal reinforcement were considered. Specimens…
RSCC) were assessed utilizing V-funnel, L-box and slump flow tests. Flexural strength, compression strength, and tensile strength tests were performed with a specific end goal to examine mechanical ... mixes contained…
site for its resistance to erosion include particle size, permeability, water retention characteristics, compressibility, shear strength, void ratio or porosity, shrink-swell potential, liquid limit and plasticity…
this paper is to investigate the various mechanical properties essentially on workability and strength. Compressive strength, Slump and Compacting factor tests of silica fume concrete are performed for strength…
following 2 different procedures. Since, these are novel composites, indicative tests were performed on strength (compressive and split tensile) and durability (oxygen permeability, sorptivity and porosity) on…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.