developed the second generation of four-dimensional scanning ultrafast electron microscopy (4D S-UEM) to take time-resolved images (snapshots) of material surfaces with 650 femtoseconds and 5 nanometers ... temporal and…
microstructures of the developed coatings and uncoated samples were characterized by Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/EDS). Moreover, X-ray diffractometer (XRD) was used…
microstructures of the developed coatings and uncoated samples were characterized by Optic Nikon Optical microscope (OPM) and scanning electron microscope (SEM/ EDS). Moreover, X-ray diffractometer (XRD) was used…
deposition process. The structural, morphological, electrical and optical properties of the deposited films have been studied using X-ray diffraction, scanning electron microscopy, atomic force microscopy and UV-Vis…
consisted of small CdTe nanocrystallites, 3.1-4.5 nm in size. Scanning electron microscopy was used to analyze the surface morphology of the samples and was found that it varied with ... concentration was increased, due…
spite of the progresses of the imagers’ efficiency, notably X-ray and optical modality, their use and potentials are still dramatically limited by the low efficiency and toxicity of contrast ... contrast agents without…
devices except catheter-carrier. However, most of these alloys contain elements (including on its surface) which is toxic for organism. To satisfy the requirements of biochemical compatibility, the alloy should ... wire…
bentonite composite. Using the scanning electron microscope, ultraviolet visible spectroscopy, X-ray diffraction, and Fourier transform infrared, bimetallic Ag-AuNPs and their nanoclay composite were optically…
nanocomposite thin films have been prepared by means of spin coating technique. The optical, structural and morphological properties of nanocomposite films have been investigated. The transmission electron microscopy…
plate surface was ablated under a 10 kHz repetition rate and maximum pulse energy of 3 mJ and 35 ns pulse duration. Structural, morphological, optical, and chemical-bond properties ... synthesized Mg and MgO…
different rigid and flexible inorganic and organic substrates with atomically flat or stepped (terraced) surfaces is suggested. 2D materials are obtained manually (homemade) or mechanically (for mass production) by…
applications, pure SnO2 nanocrystals show a few classical drawbacks, mainly due to their large surface-to-volume ratio. Two standard strategies to advance the application-based performance of SnO2 ... band gap are…
surface area to the volume ratio, unique mechanical performance (tensile strength and hardness), flexibility causing to introduce as ideal material for medical, filtration, energy devices, textile, and tissue…
nanocomposite thin films have been prepared by means of spin coating technique. The optical, structural and morphological properties of nanocomposite films have been investigated. The transmission electron microscopy…
nanocomposite thin films have been prepared by means of spin coating technique. The optical, structural and morphological properties of nanocomposite films have been investigated. The transmission electron microscopy…
investigation of highly crystalline nickel, cobalt and alloy nanowires, which have multiple magnetic and optical sensing, and also biomedical, applications. Once again, there was an initial key observation ... during an…
lens sample was hydrated in a 0.9% saline solution for 24 hours before the optical and physical characteristics of the lens were measured. The basic properties of the contact lenses ... were subsequently evaluated. To…
different rigid and flexible inorganic and organic substrates with atomically flat or stepped (terraced) surfaces is suggested. 2D materials are obtained manually (homemade) or mechanically (for mass production) by…
change in optical density of standard film badge dosimeter. Properties of the scaffolds were examined by means of viscosity measurement, XRD analysis, FTIR spectroscopy and scanning electron microscopy ... beam exposure…
First, we demonstrate the impressive second-order nonlinear optical characteristics of a series of silver rich phosphate glasses, while employing laser scanning imaging microscopy in order to determine the effects…
forming a slimy layer. Oral bacteria have the capacity to form biofilms on distinct surfaces. Bacteria also form dense colonies on root canal walls and features like isthmuses and lateral ... removing the biofilm…
fluids (SBF) and gold nanoparticles (GNPs), to assess the osteogenic effect of the new surface on osteoblastic differentiation with and without UV photofunctionalization. Materials & Methods: Commercially pure titanium…
imaging, ultrasound scanning, microwave testing etc, have certain limitations on testing the surface characteristics of low modulus aerospace vehicle components. This paper explains characterization of surface roughness…
optical band gap in the visible wavelength range and confirm up to 80% optical transmission in the visible in the films. The release of silver ions in water and saline ... spectroscopy measurements. Microbial cell…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.