future period of 2005-2035. To assess the model power, root mean square error and absolute error were calculated between monitored and modeled data. Models were appropriate for Lenjanat watershed
show that our proposed method outperforms other benchmark fitting methods by comparing root mean squared error and mean absolute error as accuracy metrics on a historical data of wind turbine
both calibration and validation the Coefficient of determination (R2), Nash-Sutcliffe efficiency (NSE), Root Mean Square Error (RSR) and Percent Bias (PBIAS) criteria were exploited. The average calibration NSE values
models were compared using coefficient of determination (R2), chi-square (χ2) and root mean square error (RMSE). Some selected functional properties of the dried onion were also examined. It took
show a high correlation between observed and predicted data (r2=0.85). The calculated root mean square error for the results of the ANFIS model is equal to 1.02. The index
performance of the proposed LSTM-based model is measured in terms of the root-mean-square error (RMSE) between the actual temperature and it is predicted one. Consequently, the RMSE
horizontal positions of the eleven test points. Results show that a horizontal positional root mean squares error of 11 mm can be obtained using the Leica
using manually measured-field DBH, and coefficient of determination (R2) of 0.989 and root mean square error (RMSE) of 1.30 cm (6.52%) were achieved. Two-way tree height validations were
measurements and red band of Landsat 8 OLI with R2 = 0.84, p < 0.05, Root Mean Square Error (RMSE) = 0.28 and Scatter Index (SI) = 0.22. Simulating WAves Nearshore (SWAN) model
Index (GFI)=0.995, Adjusted Goodness of Fit Index GFI (AGFI)=0.977, RMSEA (Root Mean Square Error of Approximation)=0.000, which reflected perfect fitness among Turkish cancer patients, were measured. Limitations
showed the coefficient of determination (R2) of 0.94 and root mean square error (RMSE) of 5.48% with 9 latent factors (LF). Furthermore, the PLS model of NADH content was observed
showed the coefficient of determination (R2) of 0.94 and root mean square error (RMSE) of 5.48% with 9 latent factors (LF). Furthermore, the PLS model of NADH content was observed
employs the problem's constraints and GWO algorithm tries to minimize the root mean square error. Experimental results show that the proposed method can develop the performance of the standard
fused image. The resulting image was evaluated using objective metrics of Entropy (H), Root Mean Square Error (RMSE) and Peak Signal to Noise Ratio (PSNR). The results showed that
assessed statistically by using quantitative statistical indicators: coefficient of de-term ination (R2), root mean square error (RMSE) and index of agreement (IA). In order to estimate the level
model was high with a correlation coefficient (R2) of 99.6% and a root mean square error (RMSE) of 0.2%. The predicted values obtained during drying showed R2=98.2% and RMSE
percentage deviation modulus (E%) less than 1%, χ2 ≤ 2.68 10-1 and a root mean square error (RMSE) ≤ 0.2808). The K parameter of GAB model was found to increase with
performing model predicting total cost was Support Vector Machine with Linear Kernel with root mean square error (RMSE) values of 0.561 whereas for LOS was the Principal Component Analysis (RMSE
identify cloud motions and to predict the DNI according to these motions. Normalized root-mean square error (nRMSE) presented a value of about 30% from 15 minutes to one hour
organic ligands. The models have reasonable prediction performance: root-mean squared error in external 5-fold cross-validations varies from 0.49 (Li+) to 2.30 (In3+) (the log K units) which
performance. The proposed model was simulated using Matlab software environment. Statistical parameters like root mean square error, t-statistic and coefficient of determination were calculated in order to assess
results showed that the values of the coefficient of determination (R2), the root mean square error of prediction (RMSEP) and the residual predictive deviation (RPD) were
removal efficiency was current density × pH, since it recorded the least training root mean square error of 5.04. This study demonstrated that ANFIS could be used as a tool
runoff in the basin. To calculate model accuracy, the correlation coefficient (R2) and root mean square error (RMSE) were estimated as 0.62 and 0.003, respectively. These results showed that
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.