solvent evaporating technique. The prepared binary blend films were analyzed by using Universal Testing Machine (UTM), Scanning Electron Microscope (SEM), FT-IR spectroscopy and Thermogravimetric analysis (TGA). With…
mechanical behavior of structural materials under compression tests, which are done in a universal testing machine. In this work we show an evaluation of the in-field measurements obtained
compressive strength at the age of 7 days and 28 days by universal testing machine. Then the specimen were subjected to the elevated temperature 200oc, 400oc, 600oc, 800oc and 1000oc
TiO2 nano powder with copper metal powder in a universal testing machine. The thin films of Cu-TiO2 nano composite coatings obtained by sputtering were characterized using
manufacturers’ instructions. A shear load was applied to the specimens using universal testing machine at a cross-head speed of 0.5 mm/min until failure. Data were analyzed statistically
strength, and flexural modulus were measured using three point-bending test with a universal testing machine. The toughness was related to the total area under the load-deflection curve
Microscopy (SEM), Thermogravimetric Analysis (TGA), Atomic Force Microscopy (AFM), and mechanical test via Universal Testing Machine (Instron 8841). The results revealed that chitosan and graphene could mix with each…
crowns cemented before held in a metal base for the testing using universal testing machine. A compressive load at a crosshead speed of 1mm/ min at an angle of 135º
Elipar), W - (Woodpecker) and A - (Allure). Light curing was performed for 40 sec. Universal testing machine at a crosshead speed of 3mm/min was used to evaluate the shear bond
thermocycling (500 cycles, 5-500˚C), shear bond strength was tested with a universal testing machine and mode of failure was evaluated by a stereomicroscope. Data was analyzed by SPSS18
diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and universal testing machine (UTM) were employed to characterize the developed formulations. Equilibrium swelling of the…
tested for buckling resistance by application of load in axial direction using a Universal Testing Machine. The load required to generate a lateral displacement of 1 mm were recorded
investigated. The tensile test and flexural test has been carried out using Universal Testing Machine, impact test has been carried out using Charpy method, hardness test has been done
doped films containing different weight percent of PVC/PEG were characterized using universal testing machine (UTM). Tensile strength and young’s modulus of blend films decreases and elongation at break
compared. For figuring out Tensile Strength , we carried out Tension test on Universal Testing Machine (UTM), by finding out Modulus of Elasticity (E) value and further analytical calculation
polished, DBA's and universal nanohybrid composite placed. After48hours, SBS was tested with universal testing machine. Samples of each group were prepared and imaged for descriptive assessment with CLSM. Results
blending. Degraded films were subjected to Fourier Transformed Infrared spectroscopy, Scanning Electron Microscopy, Universal Testing Machine, Differential Scanning Calorimetry analysis to investigate its structural…
like tensile strength, impact strength, flexural strength and hardness were also studied using Universal Testing Machine (UTM). The results show that the blend having 20% loading of polyurethane (PU) with
reinforced polymer) were evaluated for their bond strength during tensile testing with a universal testing machine using a conventional composite (Transbond MIP, XT) and in the case of the fiber
laser. All samples were tested for shear forces with a universal testing machine (Instron 4444). PMMA (polymethylmethacrylate) cylinders were used as shear bodies. SEM (scanning electron microscope) images were taken
cylinders of fissure sealants were submitted to an SBS test in a universal testing machine with a crosshead speed of 0.5 mm per second. The data were analyzed by means
shear bond strength for each specimen was measured with a universal testing machine at a cross-head speed of 0.5 mm/min. Data were analyzed with ANOVA and Turkey tests
composite was bonded to each capping material. Bond strength was tested in a universal testing machine and data were analyzed using 2-way ANOVA and Duncanâ??s multiple range test
Impergum / ESPE) the specimens were embedded in acrylic resin, then secured in a Universal Testing Machine. A compressive load was applied at the 90 degree angle until fracture occurred
were fabricated in metal mold and peel bond strength was evaluated by using universal testing machine. Analysis of specimens was done by One-way ANOVA and Tukeyâ??s post
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.