Influence of short-term ageing prior to high temperature creep of ferritic creep-resistant P92 steel
Tungsten modified 9%Cr ferritic steel (ASTM Grade P92) was aged at 650 °C for up to 5000 h prior to creep testing. The creep behaviour of this steel
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
Tungsten modified 9%Cr ferritic steel (ASTM Grade P92) was aged at 650 °C for up to 5000 h prior to creep testing. The creep behaviour of this steel
process of synthesis of cobalt ferrite using confined impact jets has been studied experimentally at relatively low temperatures (20 ° C to 30 ° C) and ambient pressure. Unlike hydrothermal synthesis, usually
variation of resistivity and thermo emf with temperature for the ferrites with NiCrxFe2-xO4 has been studied. The conduction process in the first region 450 K due to polarons
water soluble carcinogenic methylene blue (MB) dye by using polyaniline (PANI)-Nickel Ferrite (NiFe2O4) nanocomposite in aqueous solution. Different parameters like dye concentration, dose of photocatalyst, contact time
MagnesiumâÂ?Â?Chromium spinel ferrites with the general formula MgCrxFe2-xO4 (0 âÂ?¤ x âÂ?¤ 1) were synthesized by the ceramic technique and characterized using X-ray diffraction, FT-Infra
there was no evidence of a study focused on the use of manganese-zinc ferrite-bioglass and glass ceramic composites. By this point of view, the potential scientific work
effect of co-substitution of Ca and Mn on structural properties of bismuth ferrite ceramics was studied. The prepared samples are analyzed by XRD and FTIR studies. The crystallite development
fuel is preferable to prepare single phase NiFe2O4 nanoparticles with better crystallinity. Nickel ferrite powders (NFO) were further investigated using Raman spectroscopy in order to differentiate the NFO from other
amide derivatives were synthesized employing nano copper ferrite catalyst. XRD and TEM data of CuFe2O4 exhibited cubic phase morphology with an average partial size of 10-15 nm. The remarkable
Nano-crystalline zinc-substituted cobalt ferrite powders, Co1-xZnxFe2O4 (X=0.0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1.0), have been synthesized by the Co-precipitation method. The structural and magnetic
present work the physicochemical properties of oleic acid coated cobalt ferrite nanoparticles (CFO NPs) were examined. The CFO NPs were prepared by the solvothermal synthesis in a water/pentanol
Present paper deals synthesis and characterization of nanostructure Ferrite materials like Fe2O3, NiFe2O4 CuFe2O4 and ZnFe2O4. The sensing materials were characterized by SEM, XRD and UV-Visible spectroscopy. The powders
determined byX-ray diffraction (XRD) and the results confirmed the single phase spinel ferrite formation. Theaverageof crystallite sizeswas calculatedabout 13 nmusingScherrer’s formula from the broadening of themost…
Polycrystalline spinel ferrites of ZnXMg(1-X+t)TitF2-2tO4 (where t=0.05 and x=0.2, 0.4, 0.6) series are prepared with traditional double sintering ceramic method. The structural
various compositions ofMgNi ferrite systemwere synthesized by coprecipitation technique. The resulting powder of composition Mg0.5Ni0.5 Fe2O4was further heated at different temperatures from600oC-1000oC for four hours…
CoEr0.0.25Fe1.975O4, CoFe2O4/0.1GR, and CoEr0.0.25Fe1.975O4/0.1GR nanoparticles were synthesized by
In this current work, the numerous goals are to urge prepared NiFe2O4
An efficient and solvent-free approach for various substituted Bis-amides is
This study focuses on the modulation of synthetic parameters in order to
In this paper we report the synthesis of BiFeO3 ceramics by solid
For authors and organisers
Find the right journal for your paper and submit your manuscript.