nanoparticle was prepared from the synthesized fine SiC powder by DC thermal plasma reactor. Si powder of 99.5% purity with average size of 6 μm was mixed with activated carbon
effectively studied by time-of-flight technique at the IBR-2 pulsed reactor. The important option of the HRFD diffractometer is a possibility to utilize both high-intensity and high
morphologies were obtained with respect to the location in the downstream part of the reactor. At L1 position, carbon deposit groups in layers with a composition of 98.3% carbon
thermal stability, as well as biocompatibility of carbon-based materials. A modified arc discharge reactor was utilized to synthesise CEINPs at near atmospheric pressure (5-8 ? 104 Pa). The morphologies
focused on the design of a novel plasma jet chemical vapour deposition (CVD) reactor for the synthesis of carbon nanotubes (CNTs) using carbon waste. The use of this reactor
materials. The variables in pyrolysis process are temperature programming, pyrolysis atmosphere, residence time, reactor design and additives mainly catalysts. Pyrolysis of mono-constituent materials either biomass or…
metal in active hydro-processing catalysts stabilized for four years in a commercial reactor, calls in to question current theories of the structure of promoted catalysts. In addition application
holding times (30-60 min) and catalytic conditions, using a high pressure Parr reactor. HTL generated up to ~51% biocrude in the presence of a catalyst. This biocrude had higher ... petrocrude. HDO experiments were…
even at reformer temperatures as low as 700?C. A single-stage preferential oxidation reactor was included to achieve the CO concentration required by the LT-PEFC. The effect
post-treatment step resulting in 45% reduction in organic content and decolourization. Parabolic trough reactor was designed for efficient solar photocatalytic oxidation. The reactor consists of aluminium sheet as…
based on a comprehensive computer model developed in our laboratory for Slurry Bubble Column Reactor (SBCR) was used to predict the performance of a commercial-scale ... predicted for cobalt and iron catalysts. The…
mechanism of the process and in the process engineering and process intensification such as reactor modeling and reactor design. The continuous processes using catalytic fluidized bed reactors on the same ... lines as…
presence of hydrogen and catalyst. Therefore, the removal of the remaining benzene from the reactor?s effluent stream is a very important process. However, the separation of benzene and cyclohexane
Kazakhstan deposits (No 1 and No 2). The process was studied in the quartz reactor at the temperature of 40 - 800C. The source of UV radiation was a mercury
dehydrogenation at different temperatures for selective production of acetaldehyde, using a fixed-bed flow reactor. Nanonickel-functionalized silica xerogel (F-SG-Ni) exhibited the highest selectivity toward…
hydrolyzate) and yield of lipid-rich solids (biofuels intermediate) was studied using continuous flow reactor. More than 2/3rd of the total nitrogen and phosphorous content in algae was extracted
paradigm in High- Throughput Screening where individual assays are compartmentalized within micro droplet micro reactors. By combining a decrease of assay volume and an increase of throughput, this technology goes…
given drug (IPR). The synthesis platform relies on the use of microtubular reactors and micromixers to benefit from intensified heat and mass transfers. Controlled/?living? polymerization reactions have mainly been
biocatalyst offers flexibility of operation in packed-bed, batch or continuous-flow stirred tanks reactors. This genetically modified yeast allows the industrial production of FOS in a cost effective manner
membrane increases its hydrophilicity which also contributes to fouling mitigation. Photo-catalytic Membrane Reactor (PMR) can be divided into two main groups: photo-catalyst in suspension or immobilized
scale MBR was investigated by quantifying their amount in different regions of the reactor, under different filtration conditions, for identifying potential key-zones to target in priority for a more…
INAA). After irradiation of the samples with thermal and epithermal neutrons from the PULSTAR Reactor, all of short-lived, medium-lived and long-lived isotopes spectra were collected with HPGe
process mass intensity by 99%. Surface modification of polybenzimidazole membranes for catalytic membrane reactors and improved stability will be discussed
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.