Optical Microscopy (OM), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray diffraction, loss On Ignition (LOI), thermogravimetric and differential thermal analysis (DTA-TGA)…
mechanical properties expressed in elastic modulus from 336.86 to 465.41MPa. The X-ray diffraction showed amorphous and shift to lower d-spacing, i.e. at lower distances between the polysaccharide
composite as well as the degree of exfoliation of clay are studied by X-ray diffraction (XRD) and transmission electron microscope (TEM). Its free volume parameters (size and fraction
colloidal Ag-NPs. The nanoparticles were characterised using UV-vis absorption spectroscopy, X-ray diffraction (XRD), transmission electron spectroscopy (TEM), high resolution electron transmission microscopy (HRTEM)…
shape through SEM. The size and structure of AgNps are determined through X-ray diffraction. FT-IR studies showed the presence of organic components of tri-sodium citrate which
particle size, optical and chemical bonding of the prepared materials were characterized by X-ray diffraction, Photoluminescence and high resolution transmission electron microscopy, selected area electron diffraction…
sharp peak of nitrogen from the amine in ethylenediamine (EDA) of the fibers. X-ray diffraction (XRD) analysis of the fibers reveals the sharp peak on 40 (2θ) degree axis
were self-assembled and their three-dimensional structures were characterized by single-crystal X-ray diffraction. Salt I is crystallized in orthorhombic space group P212121 with
researchers. Xray diffraction was used to determine the structure of obtained films. The X-ray diffraction patterns indicate that the as-deposited films and annealed films are amorphous and crystallite
techniques of differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the drug resinates. The ratio of 1:4 was found
elemental analysis, IR, 1H-NMR, LC-MS mass, electron absorption spectra and powder X-ray diffraction. 3D molecular modeling structure of the ligand was obtained by using Argus lab software
also determined. Extracted precipitated silica particles were characterized by Fourier transform infrared (FTIR), X-Ray diffraction and Optical microscopy techniques. The chemical composition of silica was confirmed by…
matrix, on the properties of the obtained powder composites were studied. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to investigate their phase composition and morphology
Laser Scanning Microscopy (CLSM) Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD). The bonding strength, hardness distribution, and thermal shock properties of the…
dilute acetone in air. Their structure and surface properties were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), BET surface area measurements and energy-dispersive X-ray spectroscopy
âÂ?¤ x âÂ?¤ 1) were synthesized by the ceramic technique and characterized using X-ray diffraction, FT-Infra Red and Raman spectroscopy. From XRD diffraction patterns, the lattice parameters, bond
properties of the milled powders were studied by X-ray diffraction (XRD) technique and transmission electron microscopy (TEM). Then, the milled powders were cold pressed and sintered at different temperatures
Baviaankop, Kromellenboog, Penge 1 and Streatham 1. Samples were prepared for analysis with X-Ray Diffraction (XRD) and Scanning Electron Microscopy - Energy Dispersive X-ray (SEM-EDX) techniques. The preliminary
laboratory in preparation of Scanning Electron Microscope – Energy Dispersive X- ray (SEM – EDX), X-Ray Diffraction (XRD)and X-Ray Fluorescence (XRF)analyses. Both, the amphibole and serpentine asbestos mineral
effect of annealing on the structure, morphology and optical properties was studied. The X-ray diffraction (XRD) and Atomic Force Microscopy (AFM) measurements confirmed that the films grown by this
controlled one step heat treatment method. The crystal structure was investigated by using X-ray Diffraction (XRD) and Scanning electron microscopy (SEM). The XRD results and SEM micrograph reveal
were the precursor materials and doping source materials. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) spectroscopy had been used to analyze the morphological properties and structures of this
60oC for 1 h. Structural characterization of the layers was carried out using X-ray diffraction (XRD). Field emission scanning electron microscope (FESEM) was used to analyze the surface morphology
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.