Results showed that COD removal was 54-78 % of which effluent achieved less than 50 mg/L. In addition, the withdrawal was mostly non-performed suspended solids. TMP level increased
major industries causing water pollution. In any dairy industry the quantity and characteristics of effluent depends upon the extent of production activities, pasteurization to several milk product. Dairy wastewater
permanently. Textile industry processes are mainly based on chemical reactions in liquid medium. Its effluent creates a serious water pollution and enhance the value of Biological Oxygen Demand ... major…
test were applied in the hypothesis testing. The result shows that huge amount of effluents are discharged on the environment in using fossil energy products thereby polluting the environment. This
most cases). Initial dilution and its characteristics play important roles in designing of effluent disposal into the sea. Using the mixing model is very common for estimation of initial dilution
these areas were indicative of sewage pollution. Therefore monitoring the indicator organisms in the effluents is more likely to be predictive of the presence of certain pathogens in order
most commonly occurring heavy metal pollutants and they are major constituents of industrial effluents. In order to solve the environmental problems with heavy metals, they have to either be removed
purpose of tertiary treatment is to provide a final treatment stage to raise the effluent quality before it is discharged to the receiving environment (sea, river, lake, ground, etc.). Screening
modes through which pollutants enter the biosphere is that of industrial effluents. Bioremediation is a method available for reclaiming the environment which have been polluted. It is an option that
dying a batch of fabric, it?s cheaper to dump the used water ? dye effluent ? than to clean and re-use the water in the factory. So dye factories across ... world are dumping millions of tons of dye effluent into…
human and animal waste disposal, use of well treated organic manure/waste water and effluents as fertilizers and for irrigation, thorough washing and cooking of fruits and vegetables, education
ratio 50:50%v/v. The flow rate was 1ml/min and effluents were monitored at 282nm. The retention time of Nebivolol and Hydrochlorothiazide was 3.5 and 5.4 min respectively
Indonesia etc., Many of these rivers bring along with them, a large quantity of effluents from cities / towns located on either side of these rivers, thus making the Bay nutrient
adjusted by phosphoric acid) at a flow rate of 0.8 mL/min. Effluents from the column were monitored at 240 nm. The proposed method is specific, accurate
migration was analyzed in a time-dependent manner using confocal microscopy analysis. Further, flow effluent through the vascular tubes in the bioreactor was collected on a regular time interval
have been successfully applied to waste water streams such as sewage sludge, and industrial effluents. Anionic bio-surfactants (Rhamnolipids) produced by the bacterium of Pseudomonas species has been effectively used
atmospheric deposition, erosion of geological matrix or due to anthropogenic activities caused by industrial effluents, domestic sewage and mining wastes. The present study analyzed the concentration of seven elements
used. The flow rate was 1.0 mL/min. and effluents were monitored at 271 nm. The retention time of simvastatin was 2.05 min. The method was validated for parameters
using ortho phosphoric acid was used. The flow rate was 1.0 mL/ min and effluents were monitored at 232 nm. The retention times of levocetirizine and montelukast were
Treatment and disposal of heavy metals in the industrial effluents, especially in wastewater is a major concern to the environmentalists. One of such polluting heavy metal is hexavalent chromium
degassed under ultrasonication. The flow rate was 0.8mL/min and the effluent was monitored at 271nm. The retention time of telmisartan and hydrochlorothiazide were
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.