Characterizations were made using FT-IR (Fourier transform spectroscopy) and a group theory analysis. A complete assignment of the fundamental infrared modes (400-4000 cm-1) of polymer is proposed
ragi straw ash (RSA) and Biosilica (BS) were carried out through Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. The structural and morphological evaluation by Scanning Electron
polymer, glycidyl methacrylate (GMA), and coupled with an antibiotic, ciprofloxacin (C-Ag-G-D). Infrared spectroscopy studies confirmed the grafting of GMA on C while SEM images showed coating
based catalysts for vapor-phase carbonylation of ethanol. N2 physical adsorption, X-ray photoelectron spectroscopy, infrared spectrometry and Scanning electron microscopy were used to investigate the structural…
Both Bn and A-ABn adsorbents have been characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and nitrogen adsorption measurements. The prepared adsorbents have been used
effects on physical and chemical properties of water. In this study, the Fourier transform infrared spectroscopy (FT-IR) was used to explore hydrogen bonding change of cFIR-irradiated water
ratio by using drug content, saturation solubility, scanning electron microscopy (SEM), diffuse reflectance infrared transform spectroscopy (DRIFTS), X-ray powder diffraction (XRPD) and in vitro drug release. SDs were…
kneading method. The complexes were characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) patterns. These studies indicated the inclusion…
ammonium sulphate precipitation method. Carbohydrate and proteins were detected by thin layer chromatography and infrared spectroscopy techniques. Crude lectins were partially characterized by its binding affinity with…
ammonium sulphate precipitation method. Carbohydrate and proteins were detected by thin layer chromatography and infrared spectroscopy techniques. Crude lectins were partially characterized by its binding affinity with…
based adsorbent (CS3) was studied. Cross-linked starch (CS3) was characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Thermodynamic studies showed that the adsorption…
also synthesized for comparison. All samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy etc., and found to be monophasic, nanocrystalline with the…
physicochemical properties of each bone voidfiller material using x-ray diffraction, fourier transform infrared spectroscopy, inductive coupled plasma, and nitrogen gas absorption and mercury porosimetry. Biochemical…
Positron lifetime spectroscopy (PAL), Doppler broadening (DB) as well as coincidence Doppler broadening (CDB) spectroscopy of a new variety of Folic acid (FA) capped zinc oxide nano-particle samples ... Debye- Scherrer…
Visible spectrophotometer culture broth showed silver surface Plasmon band at 311nm. FTIR (Fourier transform infrared spectroscopy) analysis showed four major peaks
synthesized nanoparticles was characterized by using ultraviolet spectrophotometry, X-Ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy methods. The zeta potential value of -36…
determine the concentrations of C, H, N, S, and O, by Fourier transform infrared spectroscopy (FTIR) for comparative analysis of the chemical structures, by Nuclear magnetic resonance spectroscopy of hydrogen
nitride nanocomposites showed least degradation in water. Scanning electronmicroscopy, X-ray diffraction, Fourier transform-infrared spectroscopy (FT-IR) and Thermogravimetric analysis (TGA) were done to analyse the…
oCfor 3 hours. The reaction product is characterized physically and is evaluated with infrared spectroscopy (IR) and gel permeation chromatography (GPC). The preparedATS is investigated as corrosion inhibitor for carbon
clay on water absorbency were investigated. The synthesized polymer was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) & scanning electron microscope (SEM). The water…
characterized by transmission electron microscopy (TEM), scanning electronic microscopy (SEM), FTIR (Fourier transform infrared) spectroscopy, X-ray and thermal gravimetric analysis (TGA). It is showed that the…
polymerization method. X-ray diffraction, transmission electron microscope, scanning electron Microscopy and fourier transform infrared spectroscopy analysis indicated that Fe3O4 coated on the BaFe12O19 ferrite were…
synthesized Cu nanoparticles were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) spectrumand we calculate the size of Cu nanoparticles from XRD and found
particles were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and mathematical techniques. The results showed amorphous silica particles…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.