following two different procedures. Since these are novel composites, indicative tests were performed on strength (compressive and split tensile) and durability (oxygen permeability, sorptivity and porosity) on…
allowed to cure for 28 days. The solidified blocks are tested for unconfined compressive strength and heavy metal leaching. This research demonstrated potential recycling of tannery waste as a partial
were shown to be highly cytocompatible and to promote human osteoblast adhesion. Although the compressive strength of the foams is much lower than that of native bone, their high porosity
higher strength steels. The results of numerical analysis of middle and higher strength structural steels using in compression members are presented in the paper. The homogeneous I cross-sections ... which are generally…
replacement at various percentage were examined [8], [9]. The percentage substitution that gave higher compressive strength was used for determining the other properties such as modulus of elasticity, split tensile…
were 48.91 mm, 45.23 mm, 38.98 mm, 32.56 mm, and 26.14 mm respectively. The compressive strengths were ... respectively. The maximum compressive strength was obtained at 40% replacement with the corresponding…
analyse its photocatalytic power according to a standardised methodology, through NOx reduction capacity. Mechanical strengths, compressive and flexural were very similar as the percentage of RS increases ... pavements…
stability of dimension, better resistance of corrosion, the resistance of high temperature, high mechanical strength and light in weight, etc. To determine the mechanical properties of fiber-reinforced carbon epoxy…
study, the effects of the fly ash and steel fibers on compressive, split tensile, shear, flexural, and torsional strength of high strength plain and steel fiber reinforced concrete beam specimens ... steel fibers by the…
penetration tests were performed on lime-fly ash blends. Effect of curing on unconfined compressive strength was also studied. Addition of lime to fly ash decreased the maximum dry density ... content. 4% lime was found…
illite soil. Also, direct shear and unconÃ?¯Ã?¬Ã?ned compression tests were done to investigate the strength parameters of contaminated illite. In addition, scanning electron and atomic force microscopes ... presence of…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.