novel systematic mechanics-based approach was developed using SOLIDWORKS to create a mesoscale finite element model to analyse the bearing strength of pin-loaded textile structural composites. The woven-based
failure characteristics determined from the uniaxial tensile tests were identified to a finite element model within 20 divagation. Fractographic analyses was performed using microscopy to probe failure mechanisms
implant-supported mandible utilizing 3D finite element analysis. Materials and Methods: Six finite element models for the completely edentulous patient were created which corresponded to three different implant diameters
this research investigates theoretically the planar MAF process. With the use of a finite element model, the magnetic field is simulated. The surface of thin sheets will become abrasive
beam. Then, heat propagation has been calculated by means of temperature-dependent finite element models. These simulations have taken into account the pulsed time pattern of the synchrotron beam. Results
dynamic vibrational compaction loads on the stability of underlying concrete pipes using finite element modeling (FEM) analysis method is investigated. The FEM is conducted on different reinforced concrete pipe
process of damage will aid in diagnosis, therapy, forensics, and other disciplines. Finite element modelling is a technique that can help with this knowledge, but precise material properties, such
used to increase the strength of the exoskeleton and reduce the weight. A Finite Element model was developed to investigate the forces’ effect during the walking cycle on the proposed
step towards predicting these properties, a 2D axisymmetric and a 3D finite element model are developed for simulating the dynamics of one Newtonian drop by a Newtonian matrix fluid with
CleanCoat™ L-Hook (Medtronic, Boulder, CO) and a novel design L-hook. A finite element model of the monopolar electrode was established to simulate the cutting efficiency and thermal damage
crack growth in the heat affected zone as a numerical simulation example, the finite element models of the single crack propagation in the outer wall of the pipe weld
subsequently the lattice steel tower-cable system. This was achieved by creating a finite element model using computer software (ADINA) and (SAP2000). It is shown that many improvements
industry as well as for CO2 storage formations. Finite element models are being developed to simulate the nanoparticle injection and ionic transport processes of the technology
efficient in stiffness and capacity as well as more economical. Three-dimensional nonlinear finite element models were built using ABAQUS to compare and validate the behavior of the transmission towers
Abdelrahman, K., and El-Hacha, R., âÂ?Â?Finite Element Modelling of SMA Confined Concrete Columns.âÂ? Proceedings of the 4th International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR
September 2017, (CD-Rom-8p.) Abdelrahman, K., and El-Hacha, R., “Finite Element Modelling of SMA Confined Concrete Columns.” Proceedings of the 4th International Conference on Concrete Repair, Rehabilitation
increasing void volume in the material was determined using micro-CT imaging and Finite Element modelling, attributed to entanglement of the fibres causing poor cement/fibre integration. This in turn
present study, Abaqus finite element modelling was used to explore the durability of cardiovascular stent made of AISI 316L under bending loading. In order to achieve this purpose, two geometries
above 10.0% vs. 6.5% This 4-year research project utilized advanced mathematics, finite element modeling, signal processing, big data analytics, statistics, and artificial intelligence. Results: Among
curved beam are studied. From the present research, a three dimensional non-linear finite element models are adopted to investigate the behaviour and maximum deflection of RC curved horizontal beams
equipped with corner CSBs is presented. Finally, a parametric analysis by means of finite element models is carried out in order to assess the possible advantages related to the implementation
from imaging to small angle scattering (SAXS) to diffraction (WAXS). Subsequent analysis by finite element modeling (FEM) and fast Fourier transformation (FFT) allowed agreement to be achieved between predicted