Fungi are conspicuous degraders, so, our aims were to isolate filamentous fungi from contaminated effluents, to apply fractal geometry to fungal growth in fluid medium and to evaluate fractal parameters…
industries or expansion of existing industrial establishments resulted in the disposal of industrial effluents, which discharge untreated effluents causing air, water, soil and soil solid waste pollution. These disposed…
copper adsorption from industrial waste water was studied with the aim of detoxifying industrial effluents before the safe onto land or into river. In this study, removal of copper
potentially an attractive methodology for removing hazardous dyestuff and heavy metals from industrial effluents. In this work the removing efficiency of an industrially important dye Alizarin Red S from aqueous
Physicochemical parameters of the influent and effluent water of the Badwai sewage treatment plant were analyzed during January to December 2009. In order to achieve this objective, water samples were
soils and organic matter contents. Hansenula angusta and Rhodotorula minuta were isolated from industrial effluents and used in desorption experiments; the obtained Flu uptake parameters explained the efficiency of both
ratio of 55 : 45. The flow rate was 1.0 ml/min and effluents were monitored at 252 nm and eluted at 2.14 min (OLM) and 4.62 min (HCZ). Calibration curve
cost adsorbent. The present study deals with the removal of dyes from textile effluent by activated carbons developed fr om Jack fruit tree leaves (JTC). Direct Yellow
small scale levels in the glass city of U.P. are ever increasing. The effluents from dying units play a vital role in toxicating the ground water quality. In the present
results are observed have been confirmed with analytical studies and spectrophotometrically. Textile effluents are highly toxic as they contain a large number of metal complex dyes
loam soil treated with the influent alkylbenzenesulphonate. The concentration of Pb in the column effluents of soils percolated with 0.01M KCl in 0.01% alkylbenzenesulphonate and with ... significantly less than those…
industrialization and urbanization disposal of industrial as well as domestic effluents become more and more complex. Hence various techniques were developed for purification of water. Pollution of water streams causes
flow rate was optimized at 1 mL/min and effluent was monitored at detection wavelength of 246 nm. The total chromatographic run time was 10 minutes and the retention time
this experiment. A Total time required for photocatalytic degradation is different for different effluent samples, varied from 60 to 180 min. Parameters like band gap; Dose of Catalysts concentrations ... effluent, pH…
adjusted with triethylamine) was used. The flow rate was 1.2 mL min -1 and effluents were monitored at 235 nm. The retention times (t R ) of salbutamol sulphate and theophylline
mobile phase at a flow of 1.0 ml/min and effluent was monitored at 254 nm . The method was validated in terms of Specificity, Linearity and Range, Precision, Accuracy, Intermediate
through sanitary wastewater) and into the environment. Therefore, it is advisable to collect this effluent in a separate system for its treatment prior to final discharge to the municipal sewer ... Institute of Ireland…
present study, ultrasonic irradiation treatment technique was used to treat the sewage sludge effluent, which was collected from Delhi and another sample of pure E-coli strain was processed. Samples
degradation of diluted textile effluent was studied by electrochemical technique. For electrochemical degradation, the graphite carbon electrodes were used as anode and cathode. Electrochemical behavior of effluent was…
present study presents the sono-degradation petroleum refinery effluent and the influence of addition activated carbon and hydrogen peroxide on sonolysis. The sonolytic degradation was analyzed for the reduction…
coliform disinfection parameters were used to evaluate the efficiency of ozone to upgrade secondary effluent quality. Experimental results revealed that 10 mgL-1 O3 for 5 minutes exposure duration ... ozonation was…
others. The trail to the environment can be from rapid and direct discharges of effluent into a water body or the slow leaching of stored waste through soils. These emerging
Platinum on activated carbon) on the wet oxidation process of treating paper mill effluent. The study also assesses the effect of temperature, oxygen partial pressure and initial Chemical Oxygen Demand
presence of heavy metals in industrial effluents as a single component is generally very rare. The present study provides information about adsorption behaviour of lead, cadmium and copper in single
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.