vibration controlling force. According to the previous finite element analysis, all researchers have used ANSYS software where the MR fluid property selection is the big challenge. For solving this problem
compressive strength with suitable specimens with ASTM standards. The anylysis is done in the Ansys 10.0 for various load and result factors. So the matrix also serves to protect
body which is being determined in the project further. The analysis is done in ANSYS software and Coefficient of Drag is obtained. A truck-trailer as a ground vehicle
steady-state thermal analysis of steam turbine casing was established by finite element method (ANSYS Mechanical). A steady-state thermal analysis calculated the effects of steady thermal loads
established the mathematical model to analyze the relationship between force and displacement. Moreover, ANSYS was be used to simulate the distributions of magnetic induction lines. The simulation reveals that
linear static analysis for the steel and composite material was done using ANSYS. The results are compared with the theoretical values and found in permissible limit. The analysis is performed
dynamic. Firstly, the finite element model of miniature engraving machine is established in the ANSYS software. Secondly, based on this finite element model, static and dynamic analysis is implemented. Thirdly
curved composite beams were carried out during the casting process of concrete slab, the ANSYS finite element models were build with the time-dependent shear strength formula applied
failing of the Sneddon theory, claiming wrong exponent 2 (as do ABAQUS or ANSYS finite element simulations) is their neglect of long-range effects by shearing. Previous undue trials
strips and various numbers in layers were tested. These column sections were analyzed using ANSYS 14.5. In comparison of intact section and CFRP and AFRP bonded sections, load carrying capacity
flow over multi-element airfoils has been numerically investigated in ANSYS fluent and has been compare the aerodynamic parameters with the standard NACA airfoils 4412 and 0012. The 2D viscous
graphically with the aid of ORIGION PRO 8. The journal bearing is analyzed in ANSYS 14.0 ‘Transient Thermal’ package. The journal is modeled as a “moving wall” with an absolute
vertical pipe using the volume of fluid (VOF) methodology implemented in the commercial code ANSYS Fluent. The viscous, inertial, and interfacial forces have significant effect on the hydrodynamic characteristics
case 2) as a boundary constraint for stress analysis. Numerical technique (Finite element method, Ansys software) is used to obtain the solution of the boundary value problem
compared with kerosene drop formation in water. The Bubble formation was also studied using Ansys Fluent. A single bubble formation process through an orifice in a rectangle domain is modelled
constant incidence (rotor B). This study performed with the ICEM and CFX softwares of ANSYS, presents a numerical performance prediction of tow mixed flow for a wide range of rotational
pattern, coverage ratio and so on, an accurate and efficient simulation platform based on ANSYS/Fluent isdevelopedto simulate the multi-phase flow in subsonic/supersonic shot peening process.A new interior
tail flutter problem. The research team will present its findings from a non-linear ANSYS/Fluent based Fluid-Structure Interaction (FSI) Finite Element Analysis (FEA) of the Solar Powered
investigations are carried out for the flow fields inside the flanged diffuser using the ANSYS FLUENT commercial package based on finite volume method to solve Navier Stokes Equations
made of functionally graded materials (FGMs) subjected to thermo-mechanical loadings by using the ANSYS. The results obtained from this method are compared with the displacements and stresses
wall treatments are also investigated. All computations are undertaken using the commercial CFD code (ansys workbench 15.0). The computations, basedon the finite volume method with the SIMPLE algorithm, have been
mesh and extension tubes at inlet and outlets were created and then imported into ANSYS FLUENT 15. The Lagrangian approach is used to evaluating the transport and deposition of inhaled
monitoring of industrial processes, improving safety and the management of engineering assets. The ANSI / API recommended practice 754 - 2010, sets new safety standards of the processes based on the monitoring
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.