validated with some parameters such as Peak Signal-to- Noise Ratio and Root Mean Square Error. The results show deviation of the proposed technique over the conventional systems
CCSM3, MIROC3.2 and HadGEM1 are applied for this purpose. An ensemble technique comprising Root Mean Square Error (RMSE) and Weight Factor has been thoroughly discussed. In line with this method
configurations, a topology with 4-15-1 arrangement gave the best performances. The root mean square error (RMSE) and coefficient of determination (R2) between the actual and predicted yields were
with detection limits of 1.2 and 1.8 ng mL-1, and the root mean square errors of prediction (RMSEP) are 9.166 and 11.699 ng mL-1, respectively. The proposed method
such data by different statistical indicators such as coefficient of determination( R2),normalized root mean square error ( NRMSE),degree of agreement (D )and efficiency (E). Results indicated that, AquaCrop software
solar radiation for Nsukka. The statistical parameters used for the analysis were the root mean square error (RMSE), the modeling efficiency (ME) and the Coefficient of residual mass
results obtained were validated using actual values that are manually extracted. The root-mean-square error is of the range 1.3 vehicles for estimation of number of vehicles in queue
current pixel using contour distance vector (CDV). At last apply Fuzzy logic. Root mean square error (RMSE) and peak signal to noise ratio (PSNR) are used for accuracy evaluation
ranging from 1- 5. Parameters such as peak signal to noise ratio (PSNR), root mean square error (RMSE), signal to noise ratio (SNR), and universal image quality index (UIQI
ranging from 1- 5. Parameters such as peak signal to noise ratio (PSNR), root mean square error (RMSE), signal to noise ratio (SNR), and universal image quality index (UIQI
model results are compared with measured data on the basis of root mean square error (RMSE) and mean bias error (MBE). For Indian region, it is found that RMSE
ROMS) climatological simulation. The quality of the assimilated data has been investigated through root mean square error and correlation analysis with available satellite and in-situ data set, which
track, and rainfall consistently using one-dimensional mixed layer ocean model. The average root mean square error (RMSE) of intensity (8 hPa in CSLP and 7 m/s in surface
between median value and the true value (RD) as well as the relative root mean square error (RRMSE) obtained for each sample size. It is found that the maximum likelihood
reliability of MIKE11 NAM was evaluated based on the Nash–Sutcliffe coefficient (R2), Root Mean Square Error (RMSE), peak flow (RMSE) and low flow (RMSE). The R2 obtained during this
PLSR model with higher coefficient of determination (R2=0.51) and lower root mean square error (RMSE=0.17%). MSC-PLSR models were respectively built for Pb (R2=0.49, RMSE
Midilli et al. model was most adequate in predicting moisture transfer and root mean square error (RMSE), chi-square (χ2) and coefficient of determination (R2) were used for the determination
specific region, based on statistical parameters such as coefficient of determination (R2) and Root Mean Square Error (RMSE). The tool also provides the facility to obtain the simulated data
best results by choosing appropriate architecture. They were able to reduce both Root Mean Squared Error and Mean Absolute Relative Error values and at the same time maximize the Nash
most appropriate model(s) was selected using correlation coefficient (R 2 ) and root mean square error (RMSE). The page model showed a better fit of the experimental drying data
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.