Microcontroller for vehicle monitoring and controlling system. The main feature is to monitor various parameters such as presence of CO level, load balancing, pressure level and humidity. In this each
realistic range of dynamic soil properties (e.g. experiments carried out in a specific strain-controlled environment) at varying strain levels. Factually, the cyclic triaxial method has been the most widely ... like…
faults such as over current, over voltage, higher temperature in windings, more load on motor. Therefore, controlling, monitoring, and protection of the system are realized in real time
current of non-linear loads. Due to some disadvantages of passive filters the concept of active filters were proposed. There are so many different controlling algorithms and topologies available
fault monitoring, control and fault diagnosis of thermal power plant operation. . So as to utilise minimum fuel to generate maximum steam as per demand of load which lead to thermal
that automatically reduces the current flowing through the opto-coupler nearly zero under no load condition is achieved by replacing TL431 by reverse type shunt regulator. This feedback network ... coupling and a…
Peak current mode control of a buckboost converter along with the load and transient analysis using a PIC microcontroller is done. The new elucidation includes a discrete time controller using
factor loads or low power factor generation systems a back to back bidirectional converter set is employed for the purpose of power factor improvement. Voltage oriented vector control is used
results are presented to demonstrate the performance of the MPPT controller and designed system for varying atmosphere conditions and load disturbances. Moreover, the SEPIC converter needs no current snubber
control. Its objective is to determine the optimal combination of power outputs of all generating units in order to minimize the total cost satisfying constraints and load demand in each
operation. This control method enables a fast transient response and efficient light-load operation while providing controlled spectral characteristics of input and Output waveforms. The resonant inductors and capacitors
width modulated DC-DC converter topologies, the controllable switches are operated in switch mode where they are required to turn the entire load current on and off during each switching ... uncontrolled bridge…
reconfiguration problem. The uncertainty of system loads on different feeders which vary from time to time makes the distribution system operation and its control more complex. For a fixed network ... examined on…
recent days, power demand is more than the generation due to huge loads. Hence it is difficult to operate the power system in order to maintain stable power supply ... Voltage Stability Index (VSI), minimization of…
supply. In which a control circuit is designed using fuzzy logic controller for gate signals for the voltage regulation of the hybrid energy system. Then the hybrid energy system ... connected to the grid from which the…
This paper presents the analysis of load frequency control (LFC) of a deregulated two-area power system with Doubly Fed Induction Generators (DFIGs) integrated into both the areas. The deregulation
that can be supplied to the commercial loads. The power quality problems will be reduced with the help of Suitable control algorithm (Incremental conductance algorithm). The presented scheme portrays modeling
controller for Real Power Theory control strategy under transient and steady state conditions and adequate results are presented with different nonlinear loads
properly controls the auxiliary switch turn-on time according to the required load current; this auxiliary switch control brings the more efficient control in generative and regenerative mode operation. This
inter-area tie-line power fluctuations by a local load disturbance are a source of interconnected power system operation and control. This paper describes the application of artificial neural network
quad active-bridge (QAB) converter which not merely provides isolation for the load, but also for the PV and storage. The AC-DC stage is implemented with a pulse-width ... ports is also derived. The QAB demanded power…
user authentication and query forwarding. The coordinators concatenated in a tree structure, enforce access control and query routing based on the automata. Automata segmentation and query segment encryption schemes…
environment is very large and complex, these divisions simplify the load balancing. The cloud has a main controller that chooses the suitable partitions for arriving jobs while the balancer ... arrives at the system…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.