Research article · 2018
Conference abstractPublished 7 Sep 2017
Processing Optimization and Characterization for PLA/MgAlCu-LDH/PVP Composite Microsphere
Shanghai University of Engineering Science, China
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In order to improve the mechanical properties of polylactic acid(PLA), PLA/MgAlCu-LDH/polyvinyl pyrrolidone(PVP) composite microsphere was successfully prepared on the basis of seminal emulson polymerization with PLA and PVP as monomer, MgAlCu-LDH as intercalating agent. Design-Expert 8.5 software was employed to optimize the processing technology with two steps. Firstly, single factor was analyzed based on the mass fraction ratio of MgAlCu-LDH to PLA, PVP concentration and stirring speed range being 1/15~1/8, 1~2%, 800~1200r/min, respectively. Secondly, the interaction effects of three factors were discussed according to the analysis of the software. The results show that the influence factors to microspheres size were as follows: the stirring speed > the mass fraction ratio of MgAlCu-LDH to PLA > PVP concentration. The optimized processing technology of microspheres indicates that the mass fraction ratio of MgAlCu-LDH to PLA is 1/15, the concentration of PVP is 2%, the stirring rate is 1200r/min. The structure and morphology of the dried frozen composite microsphere were characterized by XRD, FT-IR and SEM. The intercalation of part of the PLA into the gap of MgAlCu-LDH would be responsible for the new peaks on XRD spectra of MgAlCu-LDH and the disappear peaks at 1750cm-1, 1200cm-1 assigned to C=O on FT-IR spectra of PLA, which proves PLA/ MgAlCu-LDH/PVP composite microsphere was successfully prepared. Interestingly, some tinny channels resulted from volatile solvent on the surface of microsphere may be benefit for biocompatible Recent Publications Shuhua Zhang*, Weijun Liu, Cheng Wang, et al(2016) Improving the deNOx Decomposition and Storage Activity through Co-intercalating Ammonium and Copper Ions into Mg/Al Hydrotalcites. Catalysis science & technology, RSC Advances (6): 45127-45134. Hongmei Zhang, Shuhua Zhang*, Polite Stewart, et al(2016) Thermal stability and thermal aging of poly(vinyl chloride)/MgAl layered double hydroxides composites. Chinese Journal of Polymer Science 34(5): 532-541. X.Y.Xue, S.H.Zhang*, H.M.Zhang. Structures of LDHs Intercalated with Ammonia and the Thermal Stability for Poly(vinyl chloride). American Journal of Analytical Chemistry, 2015,6(4):334-341. X.Y.Xue, H.M.Zhang, S.H. Zhang*. Preparation of MgAl LDHs Intercalated with Amines and Effect on Thermal Behavior for Poly(vinyl chloride). Advances in Materials Physics and Chemistry, 2014, 4(12): 258-266. Shuhua Zhang, Siyuan Yang, Cheng Wang, et al. Structural Characterization of Mg/Al hydrotalcites-like Compounds and their Thermal Stability. March Meeting 2014 of the American Physical Society (APS), March 3~7, 2014, Denver, Colorado, USA.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 12 Jun 2017
Nanostructure Layered Double Hydroxides (LDH): synthesis, characterization and possible applications
Conference abstract · 6 Nov 2017
Removal of fluoride from water using composite of GO: Optimization of process variables through RSM
Conference abstract · 20 Mar 2017
Optimization of process parameters for spark plasma sintering of nano-structured UNS 32205 composite
Conference abstract · 14 Sep 2015
Optimization of process parameters for the Al6061-red mud particulate composites using Taguchi method
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectMaterials Science
- BylineArticles whose byline prints “Shuhua Zhang”
