Conference abstract · 14 May 2018
Conference abstractPublished 21 May 2018
Practical approaches to energy efficiency improvement in SiC-based ceramics processing
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Statement of the Problem: Glass and ceramic industries fall into the category of energy-intensive industries and since 2014 when Integrated Pollution Prevention and Control was introduced in Russia these sectors have been closely monitored with regards to resource efficiency and environmental performance. Methodology & Theoretical Orientation: Traditional subsectors including tile and brick manufacturing in 2003-2013 participated in pilot projects intended to evaluate possibilities of implementing Best Available Techniques (BATs) in Russian industries. Based on the results of these projects BATs have been identified and national Information and Technical Reference Books developed. In manufacturing technical ceramics existing sector-specific BATs comprise mostly emissions control. However, considering materials for advanced applications such as alumina, zirconia or carborundum, where these levels are determined by strict process parameters, a generally accepted practice is to reduce energy consumption by adjusting firing temperature. This allows to suggest candidate BATs: batch composition adjustment, the use of eutectic sintering aids, and liquid-phase sintering. Findings: The present research addresses a combination of these techniques in production of SiC-based structural ceramics including selection of additives based on their physicochemical properties (melting point, surface interaction) and the use of pre-fabricated sintering aids with enhanced reactivity. The effects of the additives on sintering behavior, phase composition, microstructure, and mechanical properties were studied. Conclusion & Significance: The combination of ultrafine SiC with 25 vol. % of a eutectic sintering aid in MgO-Al2O3-Y2O3 system allowed to produce ceramics with bending strength of 450 MPa, fracture toughness of 4.0 MPaÃ?·m1/2, and elasticity modulus of 380 GPa. Sintering temperature for this material didnâÂ?Â?t exceed 1900Ã?°C, which makes this technique practically suitable to reduce emissions and the impact on the environment. This research was carried out with financial support from the Ministry of Education and Science of the Russian Federation under State order, contract No. 10.6309.2017/BCh. Recent Publications 1. T. Guseva, A. Zakharov, M. Vartanyan, Y. Molchanova, N. Makarov (2016) Identifying Best Available Techniques for Ceramic and Glass Industries in Russia. SGEM-2016. 5(1):351-358 2. Guseva T.V., Molchanova Y.P., Averochkin E.M., Vartanyan M.A., Begak M.V. (2014) Prospects for adopting the best available technologies and moving to comprehensive environmental permits in the production of glass and ceramics (review). Glass and Ceramics. 71(7-8):245-253. 3. Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry. European IPPC Bureau, 2007. 4. Information and Technical Reference Book âÂ?Â?Ceramic Manufacturing IndustryâÂ?Â?, 2015. URL: http://www.burondt.ru/ NDT/ NDTDocsDetail.php?UrlId=498&etkstructure_id=1872. 5. S.V. Zhitnyuk, D.Yu. Zhukov, D.O. Lemeshev, N.A. Makarov (2015) Modification of Silicon Carbide Based Ceramic Properties by Granulometric Composition Regulation. Glass and Ceramics. 72(7-8):245-253. 6. Mararakin M.D., Vartanyan M.A., Makarov N.A., Sazhin I.V. (2017) Sol-gel synthesis of eutectic additives for silicon carbide-based ceramics. Glass and Ceramics. 9:25-27 (in Russian).
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 9 Sep 2017
Microstructure and surface properties of Ti-6Al-4V cold spray coated with SiC-based cermet
Conference abstract · 29 Feb 2016
Laser coating of Ti-6Al-4V with SiC-based cermet
Conference abstract · 7 Oct 2013
Evaluation of material and mechanical properties of mullite bonded porous SiC ceramics prepared by an infiltration technique and conventional powder processing route
Conference abstract · 7 Oct 2013
Cellular SiC ceramics from plant precursor by silica sol infiltration and carbothermal reduction processing
More from this journal
The newest in Research & Reviews: Journal of Material Sciences.
Research article · 16 Mar 2026
Coupling Effects of Grain Structure, Precipitates and Solid Solubility on the Hot Deformation Behaviors of Cu-3.18 wt% Ti Alloy
Editorial · 31 Dec 2025
Time of Arrival (ToA): Principles Techniques and Applications in Modern Systems
Editorial · 31 Dec 2025
Carbon-Based Nanoparticles: Structure Properties and Advanced Applications
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Maria A. Vartanyan”
- BylineArticles whose byline prints “Nikolay A. Makarov”
- BylineArticles whose byline prints “Tatiana V. Guseva”
