Conference abstract · 7 Sep 2017
Conference abstract
Polyimide synthesis via reactive extrusion
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The most common way to synthetize polyimides involves the polycondensation of diamine and dianhydride monomers in solution. The reaction is in general achieved in two steps; first, an intermediate poly(amic acid) is formed, which is further cyclized into polyimide upon appropriate heating. In this solution polymerization process, high boiling temperature solvents are mainly used, such as N-methyl-2-pyrolidone. As such solvents are hazardous chemicals, there is a real interest to develop an approach preventing their use. To this end, some research works have been recently reported concerning the imidization into an extruder of a poly(amic acid) solution in dichlorobenzene. The drawbacks of this process remain in the solvent elimination and the total reaction time (several hours). In the frame of our project, we developed a method for obtaining polyimides directly in solvent-free conditions via a reactive extrusion process, within typical extrusion residence times (5âÂ?Â? 10 minutes). Trial runs have been performed on 15 mL microcompounder. The optimization of the shear conditions and of the reaction temperature allowed obtaining polyimides within a reaction time ranging from 3âÂ?Â?5 minutes. The scaling up of this process has been carried out using a twin screw extruder (L/D = 60). The polyimides obtained were characterized by both 1H and 13C NMR. The molar masses of the polyimides were obtained by size-exclusion chromatography. FT-IR spectroscopy has been used to confirm the imide structure and the imidization conversion rate has been determined by DSC. Recent Publications: 1. Sroog, C.E. et al. (1965) Aromatic polypyromellitimides from aromatic polyamic acids. J. Polym. Sci. A Gen. Pap. (3): 1373. 2. Silvi, N. et al. (2003) Method for preparing polyimide and polyimide prepared thereby. US patent no.7053168 3. Yu, H-C. et al. (2016) Kinetic Study of Low-Temperature Imidization of Poly(amic acid)s and Preparation of Colorless, Transparent Polyimide Films. J. Polym. Sci. Part A: Polym. Chem. 54 (11):1593 4. Schab-Balcerzak, E. et al. (2010) Influence of azobenzene units on imidization kinetic of novel poly(ester amic acid)s and polymers properties before and after cyclodehydration. J. Appl. Polym. Sci. 118 (5):2624 5. Liaw, D-J. et al. (2012) Advanced polyimide materials. Progress in Polymer Science 37 (7):907.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 4 Sep 2017
Catalytic Synthesis of Environmental friendly Polymer Poly Lactic Acid via Continuous Reactive Extrusion: Recent Trends
Research article · 2012
Synthesis of polyfused heterocyclic compounds via reactivity 1, 4-naphaquinone
Research article · 2012
Synthesis of polyfused heterocyclic compounds via reactivity 1, 4-naphthoquinone
Research article · 2009
Synthesis of isotactic polypropylene containing a terminal reactive group via metallocene-mediated polymerization/chain transfer reaction in the presence of protected allylamine
More from this journal
The newest in Polymer Sciences.
Article · 30 Dec 2024
Understanding Biomaterials: The Foundation of Modern Medicine and Biotechnology
Article · 30 Dec 2024
Understanding Monomers: The Building Blocks of Polymers
Article · 30 Dec 2024
Understanding Polymerization in Thermoplastics: The Science Behind Recyclable Materials
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalPolymer Sciences
- SubjectChemistry
- BylineArticles whose byline prints “Laurent Verny”
- BylineArticles whose byline prints “Regis Mercier”
- BylineArticles whose byline prints “Eliane Espuche”
- BylineArticles whose byline prints “Guillaume Sudre”
- BylineArticles whose byline prints “Veronique Bounor-Legare”
