Three novel polyimides were synthesized from a 9,10-dimethyl-2,6(7)-diaminotriptycene (T) with a commercially available bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride ... halogenated derivatives. The…
novel isomeric polyimide/SiO2 hybrid material was successfully prepared through sol–gel technique, and its structure, thermal properties and nanoindenter properties were investigated. The researches on solubility and…
most common way to synthetize polyimides involves the polycondensation of diamine and dianhydride monomers in solution. The reaction is in general achieved in two steps; first, an intermediate poly(amic ... acid) is…
Considering the wide range of applications of metal–polymer composites, composite of Fe-polyimide has been obtained by plasma sputtering method, also polyimide films were treated with plasma. Comparative study…
materials. This study shows the preliminary result for the gas separation properties of soluble polyimides as membrane materials - CO2/N2 (or CO2/CO) and H2/CH4 (or CO2/CH4) selectivities…
Some mixed matrix membranes (MMMs) were fabricated using polyimides in order to improve performance of CO2/CH4 separation. Polyimides of Matrimid 5218 and P84 were used as the polymer backbones ... MMMs showed better…
Novel triptycene-based polyimides showed promising results to be candidate membrane materials for removal of CO2 from natural gas, specifically for enhanced oil recovery applications. The gas permeation properties…
lack of high performance printable resins. To address, novel 3D printing polyimides were developed. As a typical engineering plastic, polyimide has been widely used in many fields ... performances including thermal and…
Mixed Matrix Membrane (MMM) was developed for improving O2/N2 selectivity by using a polyimide covalent organic framework (PI-COF) as filler. The PI-COF powder was synthesized by heating ... structure of PICOF was…
Thin-film polyimides were prepared by solvent-less vapor deposition polymerization (VDP) from pyromellitic dianhydride and 4,4’- oxydianiline at 200°C for liner dielectric formation of vertical interconnects called…
materials. This study shows the preliminary result for the gas separation properties of soluble polyimides as membrane materials - CO2/N2 (or CO2/CO) and H2/CH4 (or CO2/CH4) selectivities…
Highly reflective and electrical conductive polyimide films have been developed by incorporation of surface modified silver flakes and a metallo-organic compound, silver 2-ethylhexanoate, into a polyimide matrix…
TransparentNonlinearOptical(NLO) inorganic/organic(polyimide /silica) hybrid composites with covalent links between the inorganic and the organic networks were prepared by the sol-gel method. The silica content
Polyimide/Ag nanofiber membranes were made by electrospinning poly (amic acid) containing a dash of silver (I) carbamate, followed by simply thermal reduction and imidization of poly (amic acid). Poly ... oxydianiline…
Synthesis and characterization of high performance polyimide nanofibers and application on lithium-ion batteries: Polyimide (PI), as one of high-performance engineering polymers, has been widely applied in many advanced…
Porous polyimides are a kind of permeable organic polymer that is interesting to study (POPs). They have good physical and chemical stability, large surface areas, and energy storage capacities ... synthesis are…
series of polyimides were synthesis from bis(1,3-dioxo-1,3-dihydroisobenzofuran-5-carboxylic Acid) 1,4-Phenylene Ester (TAHQ) and di(eter amine)s by a standard ... step process with thermal imidization of the poly(amic…
inexpensive method can be applied for separating PAHs from diesel efficiently. An aromatic polyimide membrane was fabricated and successfully used for the said purpose. The efficiency of the process
reduce the energy loss of heater to the substrate. Since the thermal conductivity of polyimide is 0.06-0.0017 W/(cm-K), it is about twenty-fifth that of the silicon
first example in which the imidization reaction is used to synthesize 3D porous crystalline polyimide COFs (termed PI-COFs). These porous PI-COFs features multiply interpenetrated structures that
samples of Kapton-H polyimide were heated at temperatures ranging from 325 to 400 °C in air. The heat treatment induced changes in optical band gap and refractive index
using In-situ Generated Nano-Phase Structure (IGNPS) approach from the precursor solution of polyimide (PI) and tetraethoxysilane (TOES). For developing PI/SiO2 nanocomposite films, alkoxysilanewhich is precursor to…