Conference abstract · 3 Jun 2019
Conference abstractPublished 26 Oct 2017
Joining Of Sicf/Sic Using Preceramic Polymers
Yeungnam University, Republic of Korea
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
SiCf/SiC possesses great potential for applications in severe conditions, including high temperatures and structural components for future fusion reactors. Various fabrication techniques have been developed to fabricate SiCf/SiC, which generally produce simple shape, such as plates and tubes. However, their practical utility can only be realized by integrating simple shapes into complex geometries. Therefore, considerable research efforts are being directed to develop filler materials, which can be employed to join SiCf/SiC. However, SiC-based fillers being similar to the SiCf/SiC joining body are a natural choice to preserve the outstanding properties of SiCf/SiC. Taking this into consideration, we tried to obtain pure SiC joining filler by pyrolyzing the preceramic polymers, such as polycarbosilane(PCS) and polysilazane(PSZ). Both of PCS and PSZ were applied in a paste form followed by thermal treatment, where SiC was the main porducts along with the presence of small amount of Si3N4, depending on the starting material. Because cracks and pores might be generated by the vaporization of gaseous products, which can hamper the overall joining properties, careful optimization for the polymeric composition, choice of filler, heating rate, joining temperature and pressure was performed. A slow heating rate of 2°C/min was employed for the temperatures of 1600-1700°C to obtain sound and crack-free joints, while the pressure of 3.5 and 20 MPa was applied. The joining strength was estimated by 3-point bending test and correlated with the interfacial microstructure, mode of failure as well as the joint thickness.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract
Joining of polymer rod through Y-shape extrusion channel
Conference abstract · 26 Dec 2017
Fabrication and ion-irradiation response of SiCf/SiC with different sintering additives for nuclear reactor applications
Conference abstract · 21 May 2018
Joining and machining of (ZrB2-SiC) and (Cf-SiC) based composites
Conference abstract · 3 Jun 2019
Polymer derived metal containing SiC(O)-based ceramic nanocomposites for methanation reaction
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectChemistry
- BylineArticles whose byline prints “Dong Hyuk Jeong”
