Conference abstractPublished 26 Dec 2017
Fabrication and ion-irradiation response of SiCf/SiC with different sintering additives for nuclear reactor applications
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
SiCf/SiC for the structural components of Gen-IV fission and future fusion reactors has attracted considerable interest due to their excellent mechanical and thermal properties along with impressive post-irradiation response. Various fabrication routes (CVI, PIP, RS etc.) have already been reported with simultaneous ongoing efforts to develop newer routes that can yield improved properties. We report here a hybrid processing technique based on Electrophoretic Deposition (EPD) or vacuum infiltration as matrix infiltration route and subsequent hot pressing to fabricate dense and tough SiCf/SiC. The adaptability of EPD process to fabricate tubular and planar SiCf/SiC of varying sizes with tailorable properties has been demonstrated. Careful optimization of material-attributes, such as slurry composition, type and amount of sintering additives, pre-coated SiC fabric with PyC or dual PyC-SiC interphase and processing-attributes for e.g., AC-/DC-EPD, temperature and pressure variations etc., were performed. Addition of Al2O3-Y2O3, Al2O3-Sc2O3, and Sc-nitrate additives to facilitate liquid phase sintering in a processing window of 1650/1750 Ã?Â?Ã?°C and 10/20 MPa were attempted to obtain high densities (> 95% Ã?Ã?theo) and flexural strengths (450-500 MPa) with non-brittle and predictable flexural behavior. Subsequently, room temperature irradiation of SiCf/SiC under 0.2 MeV H+ ions at a fluence level of 3Ã?Â?Ã?Â?1020 ions/m2 was conducted. Comparative microstructural assessment of matrix, fabric and interfacial regions were undertaken to explain the observed flexural behavior of SiCf/SiC with different additives. Subsequently, post-irradiation evolution of microstructural features, such as matrix grain size, pores, cracks, surface roughness and corresponding flexural responses were recorded and contrasted.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Pipit Fitriani”
- BylineArticles whose byline prints “Amit Siddharth Sharma”
- BylineArticles whose byline prints “Dong Hyuk Jeong”
- BylineArticles whose byline prints “Dang-Hyok Yoon”